New Z77 system wont boot correctly

Guest · Mar 14, 2013

Hello Tom's Hardware

I just got my new system here's a list of the components:

MSI Z77 MPower
Intel 3770k
4GB Corsair memory
Corsair H60
MSI GTX 670 PE
and so on

Now my problem is that i changed a setting i BIOS, that i turned off the onboard GPU so it only use my GTX 670. This results that it won't show any picture when i start, and it wont connect to my monitor with a HDMI cable.
And the debug led shows "62"

What can cause this???

I then switch'ed to the backup BIOS, without any problems and it worked! but now my GPU wont show a picture over HDMI, but it will with a DVI cable?

Do anyone have a idea how to fix this??

bgunner · Mar 14, 2013

as for no picture, this problem sounds like it will lie with GPU, Cable, or monitor. As I have not had experience with your Bios I can't tell you exactly what to do but can you reset the first bios to default and start over?

Guest · Mar 14, 2013

As for the picture, this only happend after i chanced the setting in BIOS it worked fine before that. If i connect my labtop to the monitor with the same cable it works.

And for the reset of the BIOS i've had the CMOS battery out at that didnt work either. :/

Guest · Mar 14, 2013

would this work?

http://service.msicomputer.com/html/popup/techsup/formviewer.asp?esoformid=3051

ko888 · Mar 14, 2013

Did you unplug the system from the AC wall outlet and then use the JBAT1: Clear CMOS Jumper to reset the system configuration settings to their default?

Guest · Mar 14, 2013

Yes i unpluged it, but i took the battery out instead. becuse the JBAT1: Clear CMOS Jumper is missing the jumper (the little thing sitting atop the 3 pins)

ko888 · Mar 14, 2013

It just requires bridging the two solder points momentarily with a screw driver.

Guest · Mar 14, 2013

Ok so i did that, and when i start it up, it will reboot a few times and at some point stop. but there is still no image on my monitor from dvi nor hdmi =(

Andrew Johansen · Mar 14, 2013

This happened to me about a month ago accept It was right off the bat when I built my system now I got my replacement board and same thing. I tried doing a post test and got the debug code 62. I could not get into the bios at all, there is no input on my monitor. I tried both on-board and a GTX 560. I just made a post about this on the msi forums not even 20 minutes ago. Hopefully there is a fix. http://forum-en.msi.com/index.php?topic=167325.0

Guest · Mar 14, 2013

im so glad to hear im not the only one with these problems (kinda) =D

Search

New Z77 system wont boot correctly

Guest

Guest

bgunner

Judicious

Guest

Guest

Guest

Guest

ko888

Titan

Guest

Guest

ko888

Titan

Guest

Guest

Andrew Johansen

Honorable

Guest

Guest

TRENDING THREADS

Latest posts

Moderators online

Share this page