Sign in with
Sign up | Sign in
Your question

Problem with New Motherboard.How to reduce the CPU fan speed and Heat?

Last response: in Motherboards
Share
March 19, 2013 4:58:02 AM

Hi, I just replaced my motherboard with Gigabyte GA-78LMT-USB3 from Asus M4A88T-M LE.

With Asus Motherboard I found no issues. But with now Gigabyte Motherboard I found below issues:

Before OS Loaded :
CPU FAN SPEED : 6200 - 6500 RPM (noted in BIOS Setup)
CPU Temperature : 57°C-60°C (noted in BIOS Setup)

After OS Loaded :
CPU FAN SPEED : 6800 - 6900 RPM (noted using SpeedFan)
CPU Temperature : 60°C-65°C (noted using SpeedFan)

If my system faces heavy load(95-100% CPU Usage, just zipped 100MB files using 7-zip) it goes more than 91°C (noted using SpeedFan) and beep sound continuously sounds till CPU usage gets lower.


-I also applied necessary Cooling/Thermal paste when fitting CPU Fan(I tried many times)


How to get rid those problems?


System Configuration:
-------------------------------
OS : Windows 7 Enterprise 64bit(Clean Installation)
Motherboard : Gigabyte GA-78LMT-USB3
Processor : AMD Phenom II X4 965 BE(with stock cooler)
RAM : Corsair DDR3 8 GB (2 x 4 GB)
Hard Disk : Seagate Barracuda 7200RPM 1 TB
SMPS : 450W
DVD Drive : LG GH24NS95 DVD Burner
a c 212 V Motherboard
March 19, 2013 7:20:10 AM

Did you perform a clean install of Windows after installing the new motherboard, or did you recycle the previous installation?

If you re-used a previous install, SpeedFan could be misreporting sensor data as provided by the previous motherboard. If this is the situation, uninstall and then re-install SpeedFan.

You can also use HWMonitor to see what temps it reports.
m
0
l
a b V Motherboard
March 19, 2013 8:19:19 AM

if you reduce fan speed heat will increase, also if you see 57 c in bios you did not install the heat sink properly and you need to remove, apply only a rice size amount of thermal paste spread it even and reseat the heatsink....
m
0
l
!