Attaching front panel power LED to P8Z77-V LE PLUS

Toggle sidebar Toggle sidebar
H

Harzel

Honorable
Jan 12, 2013
7
0
10,520
I recently built a system with a P8Z77-V LE Plus mobo. The user guide is clear on where to attach all the front panel connectors (sec 2.3.8) except for the power LED, which does not seem to be mentioned anywhere.

The system works just fine without the power LED, of course, but I'd like to hook it up if possible.

Does anyone know whether there are pins for the power LED on this mobo and which ones they are?
 
Solution
H
Oh, never mind. Thank you for your answers. I found the diagram. It was the last page of the Internal Connectors section. I was flipping right past it.

Feeling stupid now....
Sort by date Sort by votes
smorizio

smorizio

Titan
Jan 22, 2010
30,984
9
125,315
did you use the front pannel connector they sent with the mb. it keyed and labled so you cant miss where the pins go.
on page 2-26 with the sata ports on top pin one is the first pin on the bottom on the left. on the bottom the first two pins are the hard drive led then there 4 open spots the next two are power switch then the reset switch.on the top row left the three pins...+ blank + is the power led connector.
 
Upvote 0 Downvote
H

Harzel

Honorable
Jan 12, 2013
7
0
10,520

As I noted, I am looking at the User Guide that came with the board. The one available online seems to be the same.

http://dlcdnet.asus.com/pub/ASUS/mb/LGA1155/P8Z77-V_LE_PLUS/E7272_P8Z77-V_LE_PLUS.pdf
Page 2-39 has a clear picture showing the IDE_LED(HDD_LED), POWER SW, and RESET SW connectors, but nothing about the POWER LED connector.

On the board itself, I don't see any labeling.

 
Upvote 0 Downvote
H

Harzel

Honorable
Jan 12, 2013
7
0
10,520

I went back through all the materials and I cannot find any additional connectors or cables that came with the mobo.

It sounds like you are looking at a manual for a slightly different motherboard, but a diagram that is exactly what I need. On this mobo, the bottom row is
HDD_LED (2 pins) + 3 open spots + POWER SW (2 pins) + 1 open spot + RESET SW (2 pins)
In the manual, this is shown in a picture of the connectors actually plugged into the system panel connector. This is in the "Building your computer system" section of the manual. The previous section of the manual ("Internal connectors"), which has top view diagrams of the connectors with each pin labeled lacks a diagram of the system panel connector.

Can you tell me exactly which manual you are looking at? The one I am looking at is version E7272 for the P8Z77-V LE PLUS. It is on line here:
http://dlcdnet.asus.com/pub/ASUS/mb/LGA1155/P8Z77-V_LE_PLUS/E7272_P8Z77-V_LE_PLUS.pdf
 
Upvote 0 Downvote
H

Harzel

Honorable
Jan 12, 2013
7
0
10,520
Oh, never mind. Thank you for your answers. I found the diagram. It was the last page of the Internal Connectors section. I was flipping right past it.

Feeling stupid now....
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom