Here are my specs.
Intel i5 2500k
ASUS Direct cuii gtx 580
ASRock P67 Extreme 4 mobo
750W power supply, corsair
8gb gskill ram
150gb SSD
Hey, I moved my computer from my house to my college, and I am worried that the bumpy ride may have damaged it.
It worked fine the night I moved, but when I started it up at school, I had no display on my monitor. I thought that the monitor was the problem, So I tried another one. That did not work.
I then thought it could be the cable, so I tried a vga cable, and an hdmi. I also switched the ports on my video card to make sure it wasn't a faulty port. I have tried every configuration.
I thought it could be the video card, so I reseated it, and switched PCI-E slots. I also cleaned it out.
I then looked at my mono, and saw there there was an error code A3, has to do something with IDE, but i can't get a display on my monitor
I googled it, and went through every thread I could find and tried every possible solution. none worked.
I tried resetting cmos,
tried a friends video card, still no display
tried booting without ssd plugged in
pressed delete, changes the error code to a6
tried moving ram slots
checking for stray cords
let it sit overnight unplugged
I have no idea what to do now. If anyone can help, I would appreciate it very much. Thanks
Intel i5 2500k
ASUS Direct cuii gtx 580
ASRock P67 Extreme 4 mobo
750W power supply, corsair
8gb gskill ram
150gb SSD
Hey, I moved my computer from my house to my college, and I am worried that the bumpy ride may have damaged it.
It worked fine the night I moved, but when I started it up at school, I had no display on my monitor. I thought that the monitor was the problem, So I tried another one. That did not work.
I then thought it could be the cable, so I tried a vga cable, and an hdmi. I also switched the ports on my video card to make sure it wasn't a faulty port. I have tried every configuration.
I thought it could be the video card, so I reseated it, and switched PCI-E slots. I also cleaned it out.
I then looked at my mono, and saw there there was an error code A3, has to do something with IDE, but i can't get a display on my monitor
I googled it, and went through every thread I could find and tried every possible solution. none worked.
I tried resetting cmos,
tried a friends video card, still no display
tried booting without ssd plugged in
pressed delete, changes the error code to a6
tried moving ram slots
checking for stray cords
let it sit overnight unplugged
I have no idea what to do now. If anyone can help, I would appreciate it very much. Thanks
Facebook
Twitter
Instagram