Sapphire radeon 7970 ghz X2
- Thread starter mraven
- Start date
kitsunestarwind
Distinguished
- Dec 24, 2011
- 837
- 0
- 19,160
That all depends on your cards.
No one can tell you the settings, cause it's different for each and every GPU there is
No one can tell you the settings, cause it's different for each and every GPU there is
inzone
Champion
- Mar 12, 2011
- 14,971
- 1
- 51,960
As with all overclocking the settings are usually what you end up with when you go through the overclocking steps and get to where you want to be. When you start out with asn overclock you tend to have a target clock speed in mind. That clock speed determines if you'll be adding voltage or not. What you should do is research some overclock benchmarks for the video card that you have and see at what point voltage is added, sometimes people want to overclock but not a lot so voltage is not needed. All cards will have a certain amount of clock speed that can be added before voltage is added. It's if you want to go past that then you have to add voltage. All cards even of the same model will go to different clock speeds before you have to add voltage so you'll have to do an overclock to find that number, there are no standard settings that anyone can give you that would be ok for your card, you have to find those settings yourself. If someone responds to this thread with numbers that they had overclocked the card then you should use those as target numbers and not just set you card there.
TRENDING THREADS
-
Discussion ABS Eurus Aqua gaming pc with Gigabyte z790 ud ac crashing and BSOD
- Started by Icarry2
- Replies: 3
-
-
-
-
News Windows 11 will reportedly display a watermark if your PC does not support AI requirements- Started by Admin
- Replies: 31
Facebook
Twitter
Instagram