Some one double check if im doing this right

onedos · Apr 3, 2013

Ok so i have been looking at videos /guides and got a good understanding on how this works.

These are the parts i got

i5 3570k - asrock extreme 4 - corsair h60 cooler

these are the settings im going to put to start messing around.

cpu ratio - all core
all core -40
speed spectrum -disabled
intel speedstep - enabled
intel turbo boost -enabled
additional turbo boost - +0.004v
internall pll - disabled
cpu voltage -offset mode
offset voltage - +0.005v
cpu load line - level 5
enhanced halt state - enabled
c3 state - disabled
c6 state - disabled
package support state diasbled
my memory 9 9 9 24 2n

im starting at 4.0 ghz working my way up since i am a newbie. Anything i should switch or i forget?

BuddyBear · Apr 4, 2013

I'm not sure about Intel CPU's but i would turn off Turbo Boost to avoid V spikes.

henydiah · Apr 4, 2013

yeah disabled turbo boost and test it use prime / intel burn test ( for check fast result temp under fulload ).. keep your eyes in temp .. don't over 80C if can get

onedos · Apr 4, 2013

henydiah :

So i went ahead and changed the settings

this is first boot after the oc - http://i.imgur.com/TqvX8SN.jpg

This is after a 2 hour blend test prime95 - http://i.imgur.com/fJnjEbp.png

Going to move it to multiplier to 42 next.

also voltage was going from 1.216 to 1.224

is this good so far

henydiah · Apr 5, 2013

no prob for voltage still safe, if not enough voltage cpu you will getting BSOD 0x0124, just try raise multi to 43 / 44 and keep voltage 1.224v as low possible ... the cores temperature show max 69C .. that still had more room to get more clock and voltage .. remember alway's save your profile OC .. if you can't boot just clear CMOS and open again your profile OC and modification setting.

Search

Some one double check if im doing this right

onedos

Honorable

BuddyBear

Honorable

henydiah

Splendid

onedos

Honorable

henydiah

Splendid

TRENDING THREADS

Latest posts

Moderators online

Share this page