Hey everyone,
I've built a gaming PC in order to optimize my WoW experience, I had been using the same out-of-the-box Dell since 2007 and I figured it was time to treat myself.
However, I've been having problems with the entire set up crashing. With no notice, often while asking a lot of the system graphically but also during fairly domestic computer-y chores, the monitor goes into standby, I hear (if I've got headphones on) a sort of buzzy dubstep sound for a moment and I have to manually reset the whole rig.
Now, often when I turn it back on, the fan on my GPU starts to kick into overdrive and gets quite loud, and sounds fairly laboured. In addition, I am often unable to get the monitor to recognize its' connection to the GPU, and I have to plug the VGA cord in to get it going analog style.
I've recently uninstalled and reinstalled all of the drivers for my GeForce GTX 560, and am sort of at my wits end because all I see when this catastrophe occurs are little dollar signs floating up to heaven.
My most recent accident report provided me with the following information:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8006BCF4E0
BCP2: FFFFF880051386AC
BCP3: FFFFFFFFC000009A
BCP4: 0000000000000004
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
And these are the components of my gaming rig:
ASUS P8Z68-V LX
Corsair TX650M
GeForce GTX 560
Intel Core i5-2500 @ 3.30 GHz
WD 500GB Caviar Green
Dell E207WFP
Kingston 2 x 4GB DDR3
Running Win 7 64-bit
Would love to get some feedback from the community and see where I can go next.
Help me, Tom's Hardware, you're my only hope.
I've built a gaming PC in order to optimize my WoW experience, I had been using the same out-of-the-box Dell since 2007 and I figured it was time to treat myself.
However, I've been having problems with the entire set up crashing. With no notice, often while asking a lot of the system graphically but also during fairly domestic computer-y chores, the monitor goes into standby, I hear (if I've got headphones on) a sort of buzzy dubstep sound for a moment and I have to manually reset the whole rig.
Now, often when I turn it back on, the fan on my GPU starts to kick into overdrive and gets quite loud, and sounds fairly laboured. In addition, I am often unable to get the monitor to recognize its' connection to the GPU, and I have to plug the VGA cord in to get it going analog style.
I've recently uninstalled and reinstalled all of the drivers for my GeForce GTX 560, and am sort of at my wits end because all I see when this catastrophe occurs are little dollar signs floating up to heaven.
My most recent accident report provided me with the following information:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8006BCF4E0
BCP2: FFFFF880051386AC
BCP3: FFFFFFFFC000009A
BCP4: 0000000000000004
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
And these are the components of my gaming rig:
ASUS P8Z68-V LX
Corsair TX650M
GeForce GTX 560
Intel Core i5-2500 @ 3.30 GHz
WD 500GB Caviar Green
Dell E207WFP
Kingston 2 x 4GB DDR3
Running Win 7 64-bit
Would love to get some feedback from the community and see where I can go next.
Help me, Tom's Hardware, you're my only hope.
Facebook
Twitter
Instagram