Black screen showing cursor help!!
- Thread starter Joelee12
- Start date
kenrivers
Illustrious
- Dec 29, 2010
- 6,684
- 6
- 37,015
I found this and it may help:
1. Boot from the Windows 7 install disk
2. After choosing your language, choose the "Repair your computer" option on the "install now" screen
3. Optional step: if you need special drivers to access your hard drives (SCSI, etc), follow the "load drivers" onscreen instructions to read them from an external source.
4. When prompted, choose the "System restore" option
5. Choose one of the previous restore points (I chose the second one down on mine just to be sure)
6. The system will roll back installs to that restore point; reboot only when prompted
Source: http://en.kioskea.net/forum/affich-27268-black-screen-with-cursor
Other possible solutions:
http://en.kioskea.net/forum/affich-662264-windows-7-startup-black-screen-w-cursor
http://www.tomshardware.com/forum/245263-44-computer-boots-black-screen-mouse-cursor
1. Boot from the Windows 7 install disk
2. After choosing your language, choose the "Repair your computer" option on the "install now" screen
3. Optional step: if you need special drivers to access your hard drives (SCSI, etc), follow the "load drivers" onscreen instructions to read them from an external source.
4. When prompted, choose the "System restore" option
5. Choose one of the previous restore points (I chose the second one down on mine just to be sure)
6. The system will roll back installs to that restore point; reboot only when prompted
Source: http://en.kioskea.net/forum/affich-27268-black-screen-with-cursor
Other possible solutions:
http://en.kioskea.net/forum/affich-662264-windows-7-startup-black-screen-w-cursor
http://www.tomshardware.com/forum/245263-44-computer-boots-black-screen-mouse-cursor
kenrivers
Illustrious
- Dec 29, 2010
- 6,684
- 6
- 37,015
You change the boot order in the BIOS by pressing F2 or another function key - all depends on the BIOS and model of your computer. Once you have done that you insert the Windows 7 DVD and reboot the computer. You will be prompted to press any key to boot from the DVD. As it says you press any key and Windows should load and ask if you want to install. Look at the lower left corner for an option to repair.
TRENDING THREADS
-
Question Integer scaling missing - nvidia control panel
- Started by ohm-ish
- Replies: 1
-
Question Wireless mouse that takes AA or AAA battery?- Started by Countess_C
- Replies: 1
-
Discussion What's your favourite video game you've been playing?- Started by amdfangirl
- Replies: 3K
-
Facebook
Twitter
Instagram