Sign in with
Sign up | Sign in
Your question
Solved

Will using a fan splitter work?

Tags:
Last response: in CPUs
Share
April 12, 2013 6:45:43 PM

Hello,

I didn't quite know where to put this, so as there used to be a Cooling subsection in CPU's I decided to give it a whack here. I currently have a CM Storm Scout, and I'm planning to undertake a massive modding project over the coming months. What I would like to know however, is whether the fan splitter I'm going to use will have a certain effect.

I'm outfitting my modded case with a load of Aerocool Shark Devil Red fans. They each come with a 12v to 7v reduction cable, which gives decent airflow and sound levels of less than 15dbA. What I was wondering, was whether the BitFenix splitter I'm going to ue will have the same effect as the reduction cable. The splitter is 1x Molex to 3x 7v 3 pin.

It can be found here:
http://www.overclockers.co.uk/showproduct.php?prodid=CM...

Best Regards
Luke

More about : fan splitter work

Best solution

a c 77 à CPUs
April 12, 2013 6:55:53 PM

that will reduce to 7 volts for the fan check on overclockers .co.uk the way the molex 4 pins is set they also have 5 and 12 volts adaptor that should work .
Share
Related resources
April 12, 2013 7:18:24 PM

So, would the BitFenix one that gives output at 7v instead of 12 v have the same effect as the reduction cable?
m
0
l
a c 77 à CPUs
April 12, 2013 7:27:18 PM

this look lke i tsince they sell it as a 7 volt adaptor .
m
0
l
April 12, 2013 7:32:02 PM

Perfect. Thanks for the help guys!
m
0
l
a c 77 à CPUs
April 12, 2013 7:44:24 PM

you welcome give back the result so other could benefit of this .
m
0
l
!