Sign in with
Sign up | Sign in
Your question

i can't login to 192.168.1.1 help me!

Last response: in Networking
Share
April 14, 2013 2:16:51 AM

i cant login to 192.168.1.1 but i have much empty space in my hard disk

More about : login 192 168

April 14, 2013 2:22:40 AM

What does the login have to do with empty space on the hard drive? And why can't you login to your router?
m
0
l
April 14, 2013 2:25:45 AM

because in other question people write to check our space.....and i want to create a server in minecraft and i have to put 192.168.1.1 to login but i cant :/ 
m
0
l
Related resources
April 14, 2013 2:44:09 AM

I recommend reading the instructions again until you fully understand what you are doing.
m
0
l
April 14, 2013 2:46:43 AM

i did again and again nothing happens
m
0
l
April 14, 2013 3:23:26 AM

nikapoel said:
i cant login to 192.168.1.1 but i have much empty space in my hard disk


Princes bride moment?

Not all routers use 192.168.1.1 as their gateway ip. open a command prompt, type ipconfig /all if this is a PC and note the GATEWAY address, it may be

192.168.0.1
192.168.1.1
10.0.0.1
10.1.10.1

in my limited experience other ip sets are probably available for private NAT networking.

Write down the IP you have as gateway ans use it instead. If you DO NOT HAVE a NAT router none of this applies to you anyway.
m
0
l
April 14, 2013 3:54:26 AM

i looked its 192.168.1.1
m
0
l
April 14, 2013 4:30:45 AM

get the minecraft server application but dont use your 192.168.1.1 Ip that is your routers
try setting up the ip In the server app to 192.168.1.150
then let other computers connect to server 192.168.1.150:( port number) not sure what port number goes here
I dont really know if what I told you will work but you can give it a try
m
0
l
April 14, 2013 10:32:47 AM

nothing happend :/ 
m
0
l
April 16, 2013 7:48:52 AM

OK lets try this:

1) Do you have a router?

If yes to (1) goto start->run, type "cmd" in the box and press ok. This will load a black box on the screen with something that looks like:
C:\>
At this prompt type "ipconfig"
What does it say for "Default Gateway" ? This is likely the IP address of your router.
If no to (1), you do not need to do anything else, because you don't have a NAT router.

2) Goto your web browser and type the IP address above as:
http://<Ip_address_here>
This may be something like: http://192.168.1.1/
If that doesnt work, you router may have unencrypted HTTP logins disable, in which case it is listening on different port. so try:
https://192.168.1.1/

If that doesnt work, try restoring your router back to factory settings. Get a paper clip and find the tiny button on the back of your router and hold it down for like 30s with the paper clip :D  then try again

If you are setting up a minecraft server, I am assuming you are trying to configure port forwarding on your router. Note that you will also need to configure your windows firewall and any software firewalls to accept incoming connections on the required ports as well.
m
0
l
!