Sign in with
Sign up | Sign in
Your question
Solved

Trying to setup a raid system in windows

Last response: in Storage
Share
April 14, 2013 5:56:22 AM

Hello,

I am trying to setup a raid system in windows 8, with the OS installed to a 250GB sata drive and then have 3 2TB drives in a raid 0 config. the problem occurs after enabling raid in the bios. The windows installer give me the following error:

'Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's BIOS menu.'

The motherboard is Gigabyte GA-880GM-UD2H, Socket AM3, AMD Motherboard HDMI/DVI DDR3 Firewire I/O with award bios.

Thanks in Advance for your help :) 

Best solution

April 14, 2013 8:03:36 AM

With the installation running, put in your gigabyte driver disc and install your raid and sata controllers manually
Share
April 14, 2013 8:13:08 AM

meowmix44 said:
With the installation running, put in your gigabyte driver disc and install your raid and sata controllers manually

Can I do that before I've selected a hard disk on the install?

m
0
l
April 17, 2013 4:56:33 PM

richi3d10 said:
meowmix44 said:
With the installation running, put in your gigabyte driver disc and install your raid and sata controllers manually

Can I do that before I've selected a hard disk on the install?



You should be able to
m
0
l
Related resources
!