Will Corsair H100i fit into a Silverstone RV02B-EW?

Raycorrupt · Apr 17, 2013

So, I've chose the RV02B-EW as my case, as it's apparently good for dust and really good for cooling. I'm not sure if it can use Corsair water cooling. Can I install a H100i in push/pull in it? Or not push/pull?
If it's not possible, is it possible with a H90 or a H80i in push/pull?
Thanks

Saehon · Apr 17, 2013

http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings

a list where people have tryed out h80(i)/h100(i) in different cases - and sadly, i cant see your's, but that may not say if it still could work out - it may also be hardware despending.

DarkSable · Apr 17, 2013

Looking at pictures of your case, it looks like it's got fans along the bottom of it? That's a pretty cool case.

As long as it doesn't interfere with your motherboard, you should be able to use an H100i with at least two fans just fine, and from everything I can tell, you've got plenty of room before your motherboard.

Raycorrupt · Apr 18, 2013

DarkSable :

Do you know where I could put it? Would it be on the bottom on top of the fans?
Some people have said that the H100i is too wide for that and that they had to mod it, but I'm not sure.

manofchalk · Apr 18, 2013

If anything the mounts might be too wide for the H100i, it has 180mm fans while the H100 uses 120mm. But on a case of that tier, water-cooling support is a given so you should be able to mount a 240mm rad there.

As long as the tubes coming from the CPU block are long enough, dont see why you couldn't do it.

EDIT: According to this guy who has done similar, the case comes with 180mm to 120mm brackets for the bottom mounts.
http://www.overclock.net/t/1155032/h100-in-rv02-e

Search

Will Corsair H100i fit into a Silverstone RV02B-EW?

Raycorrupt

Honorable

Saehon

Honorable

DarkSable

Judicious

Raycorrupt

Honorable

manofchalk

Glorious

TRENDING THREADS

Latest posts

Moderators online

Share this page