Sign in with
Sign up | Sign in
Your question

No display after installing graphics card

Tags:
  • Graphics
Last response: in Graphics & Displays
Share
April 21, 2013 3:05:06 AM

I bought a Nvidia gt 630, installed the driver , after that no display after starting windows. i first had a gt 520 but after a restart, i didn't work. So i bought a new one, but after installing it, no display after starting windows.

More about : display installing graphics card

April 21, 2013 3:12:00 AM

With two video cards with the same issue.sounds like the pc has switched from the gpu back to on board video chipset. See in the bios what chipset set to boot first from and if there is on board gpu see if there any video output. If there none check that the four or eight pin pci power plug is still connected. If is could be a bad leg in your power supply.
m
0
l
April 21, 2013 3:23:07 AM

1)Remove the gpu , plug monitor cable to mobo's onboard output

2)start pc - go to device manager - display - uninstall whichever drivers is

3)restart pc - put gpu back
m
0
l
April 21, 2013 4:35:39 AM

smorizio said:
With two video cards with the same issue.sounds like the pc has switched from the gpu back to on board video chipset. See in the bios what chipset set to boot first from and if there is on board gpu see if there any video output. If there none check that the four or eight pin pci power plug is still connected. If is could be a bad leg in your power supply.


I do not have put both the graphic cards at the same time......
I replaced my gt 520 because it was not functioning properly.Now i am using gt 630.

m
0
l
!