Sign in with
Sign up | Sign in
Your question
Solved

HyperX mix ram, 8-8-8-24 vs 9-9-9-27 BSOD 0x50 (8-8-8-24 or 9-9-9-24 works fine)

Last response: in Memory
Share
April 23, 2013 10:57:14 AM

I have two set of kingston hyperx rams 8-8-8-24 and 9-9-9-27,I get BSOD if I set my timing to 9-9-9-27, but 9-9-9-24 works completely fine , so what should I do? if i set "Auto" for dram timing, it also gives 9-9-9-24 instead of 27

cpuz shows 9-9-9-24 2T


btw I get BSOD 0x50 code which is unstable dram timing or dram v or unstable uncore multiplier, or vtt

Best solution

a b } Memory
April 23, 2013 2:39:06 PM

From what I can gather from your post if you set the ram that's 9-9-9-27 to 9-9-9-24 while running it with the 8-8-8-24 and it's fine but running it at 9-9-9-27 crashes. It's most likely due to the mix match of the 24 and 27 setting. So you should run the ram at 9-9-9-24.
Share
April 24, 2013 12:13:54 AM

inzone said:
From what I can gather from your post if you set the ram that's 9-9-9-27 to 9-9-9-24 while running it with the 8-8-8-24 and it's fine but running it at 9-9-9-27 crashes. It's most likely due to the mix match of the 24 and 27 setting. So you should run the ram at 9-9-9-24.


Thanks, then I'll stay with 9-9-9-24. :) 

i7 920 D0 4.0Ghz
bclk 191x21, vcore 1.23v qpi/vtt 1.23v cpupll 1.8
18GB DDR3 1600mhz Hyperx (3x2G 3x4G)
Asus P6T Deluxe V2
2x 5870 Crossfire.
[Still testing stability, so far able to pass IBT Very High 10 passes)
m
0
l
!