I have a Asrock extreme4 mobo with 3570k installed, just bought myself a spanking new shiny NH-D14 cpu cooler. Everything went smoothly until the fans.
There is a y cable with the cooler, and also some ULNA cables, which i connected to the appropriate fans, plugged into y cable, now which do i plug it into on the board the pwr_fan1 or cpu_fan2 as these are the only 3 pin connectors on the board.
I do have it plugged into the cpu_fan2 at the moment, but the fan on the side of the cooler, not the middle fan, does not spin, however when i give it a little nudge with my finger it kicks into life.
Confused, help please
There is a y cable with the cooler, and also some ULNA cables, which i connected to the appropriate fans, plugged into y cable, now which do i plug it into on the board the pwr_fan1 or cpu_fan2 as these are the only 3 pin connectors on the board.
I do have it plugged into the cpu_fan2 at the moment, but the fan on the side of the cooler, not the middle fan, does not spin, however when i give it a little nudge with my finger it kicks into life.
Confused, help please
Facebook
Twitter
Instagram