My RAM is operating at 70% when I doing literally nothing, If i start most games it Freezes my PC!

LCoNikeZ

Honorable
Apr 17, 2013
42
0
10,530
This has all started to happen recently I have 8GB of RAM and 70% of this should not be used while I am doing nothing, I even close down Steam and Skype and any other programs from my Task bar, but it still stays around 70% mark. I really need to know what is going on with my RAM, this problem is preventing me from playing games or sometimes even streaming videos in HD.

Specs:
CPU: Intel Core i7-2600 @3.4GHz
GFX: Gigabyte GTX660 OC
RAM: 8GB @ 667MHz
MoBo: Dell 0Y2MRG

If you need any other information just ask.

Thanks.
 

LCoNikeZ

Honorable
Apr 17, 2013
42
0
10,530


I dont think i have Installed any Ramdisk software.
 

LCoNikeZ

Honorable
Apr 17, 2013
42
0
10,530


Yes thats what i think the problem is but, I need a fix.
 
Just had this with a laptop. One of the memory chips wasn't fully seated. Just enough for windows to know it was there, but not enough to be able to use it. You'd think it'd be all or nothing, so it took a while to notice.

Granted yours isn't exactly half, but you could have some ACTUAL hardware reserve on the fully seated chip too. Worth a shot.
 
Looks to me like one stick is only working partially.. only 518MB of it seems to be working, so the cause would point to the OS. If those 518MB were not being used, the cause would be Physical memory recognition, possibly RAM or mobo slot damage, but I would not yet discard the possibility till all the following checks are done:

Windows checks:
1. Check in msconfig\boot\advanced\maximum memory http://support.gateway.com/s/software/microsof/vista/7515418/7515418su73.shtml

2. Instert the Windows disc and type SFC /SCANNOW on the Search bar, the Run command or the Command Prompt.
3. The last Windows option would be to do a repair installation or install a copy of Windows on a second partition.

Physical RAM checks:
Do this to discard the possibility of RAM or mobo damage (see your system information after each check):
1. check if both RAM sticks are fully seated.
2. take both sticks out, clean the pins with a clean dry soft cloth giving it about five passes, install them back and try the computer.
3. if still nothing, try one stick at a time on each slot, checking the results
4. next reset the BIOS.
5. if still nothing, try your RAM in another computer and if possible also borrow a stick or two of working ram to try them on your computer so you can check for RAM slot damage.