Abit AW9D-MAX BSOD ERROR

Toggle sidebar Toggle sidebar
M

mrley36

Honorable
May 10, 2013
6
0
10,510
I have been getting various BSOD's at random times: page fault in non paged area; irql not less or equal.

When I reboot the computer after receiving one of the BSOD's, it doesn't load up past the point of the 'Samurai Warrior' with an ERROR CODE of C1 or 52. The only way to get the computer to load up past this point is to remove one stick of ram (4 sticks in total 4*1G Corsair). It doesnt matter which stick I remove.

If I start up the computer with up to 3 sticks of ram inserted, I never receive a BSOD. How can I avoid the BSOD's and keep 4 sticks of ram inserted as well?
I upped the ram voltage from 1.80v to 2.10v. It didnt solve the problem.

Thanks for your help guys

  • ■Interl Core 2 Quad Q6600 2.4ghz MotherboardAbit AW9D-max■Memory 2x Twin2x 6400 ddr2 2048mb■Storage 2x 500gb Hiachi Deskstar■Graphics Card(s) Point of View GeeForce 8800Gts■PSU Corsair 520w■Operating System Win Media Centre and Win 7
 
Sort by date Sort by votes
M

mrley36

Honorable
May 10, 2013
6
0
10,510


Bios No 17

 
Upvote 0 Downvote
M

mrley36

Honorable
May 10, 2013
6
0
10,510


I ran memtest for 18 hrs checking sticks one by one. No errors.

 
Upvote 0 Downvote
C12Friedman

C12Friedman

Glorious
Jan 25, 2012
8,966
1
46,965
C1 and 52 both refer to memory (it may be other memory than ram though). Since memtest came up clean, I'll suggest checking all connections (data and power) to ensure they are firmly connected - a loose data or power connection might cause that also. After doing that I would suggest running Prime95, see what it tells ya
 
Upvote 0 Downvote
M

mrley36

Honorable
May 10, 2013
6
0
10,510


Ran Prime95. the result
[Sun May 12 15:46:38 2013]
Self-test 512K passed!
Self-test 512K passed!
Self-test 512K passed!
Self-test 512K passed!
[Sun May 12 16:02:08 2013]
Self-test 8K passed!
Self-test 8K passed!
Self-test 8K passed!
Self-test 8K passed!
[Sun May 12 16:24:46 2013]
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.

Where do I go from here
 
Upvote 0 Downvote
M

mrley36

Honorable
May 10, 2013
6
0
10,510

One of the ram modules seems to be different to the other 3.
xms2-6400 1024mb 800mhz 5-5-5-18 1.80v ver4.1 07490797
xms2-6400 1024mb 800mhz 5-5-5-18 1.80v ver4.1 07490797
xms2-6400 1024mb 800mhz 5-5-5-18 1.80v ver4.1 07490797
xms2-6400 1024mb 800mhz 5-5-5-18 xms6405v2.1 07350720
Does this matter?
 
Upvote 0 Downvote
M

mrley36

Honorable
May 10, 2013
6
0
10,510

32 bit I will enquire at Corsair about the different modules. back later.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom