3.30ghz with 1.41v is my most stable one, i have vid 1.3250.
I can't really get anything stable more than that with any configuration i set in bios. I tryed every voltage till 1.5v to get 3.40 ghz 337 x 9 but it always fails worker in first window of prime95. I know this chip can get to at least 3.40ghz I probobly have some settings not set correctly.
These are mine bios settings for 3.30Ghz.
I can't really get anything stable more than that with any configuration i set in bios. I tryed every voltage till 1.5v to get 3.40 ghz 337 x 9 but it always fails worker in first window of prime95. I know this chip can get to at least 3.40ghz I probobly have some settings not set correctly.
These are mine bios settings for 3.30Ghz.
Code:
Q6600 G0 3.30ghz
Asus P5Q-E
2x2GB DDR2 PC2-8000 5-5-5-12 Redline
AI Overclock tuner: Manual
CPU Ratio Setting: 9
FSB Strap to North Bridge: 266
FSB Frequency: 367
PCI-E Frequency: 100
DRAM Frequency: 920Mhz
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: Manual
1st Information : 5-5-5-15-3-42-6-3
DRAM Static Read Control: DISABLED
DRAM Read Training: AUTO
MEM. OC Charger: AUTO
AI Clock Twister: AUTO
AI Transaction Booster: AUTO
____________________________________
CPU Voltage: 1,41250
CPU GTL Voltage Reference: 0.630
CPU GTL Voltage Reference: 0.670
CPU PLL Voltage: 1.54
FSB Termination Voltage: 1.28
DRAM Voltage: 1.96
NB Voltage: 1.24
NB GTL Reference: AUTO
SB Voltage: AUTO
PCIE Voltage: AUTO
____________________________________
Load-Line Calibration [Enabled]
CPU Spread Spectrum [Disabled]
PCIE Spread Spectrum [Disabled]
CPU Clock Skew [Auto]
NB Clock Skew [Auto]
CPU Margin Enhancement [Optimized Mode]