Sign in with
Sign up | Sign in
Your question

Corsair H80i only pumps before POST.

Last response: in CPUs
Share
May 12, 2013 10:15:52 AM

As the title states, The lighted logo on the Corsair H80I only light before POST (and I assume the pump is not running if the light is off) and the slight vibration in the tubes from the pump is gone.

In the corsair link program I show 0 pump, 0 fans 1&2, and 0 on h80i temp.

I tore the computer apart the other night to do a re-wire (for esthetics mostly) that's when it stopped working properly, up until then everything was fine.

Specs:
mobo: GIGABYTE 990FX-UD3
cpu: AMD FX-8350
ram: 16gb G.skill
video: 2x Sapphire 7850 OC editions
power: Corsair TX750

I can't seem to find anything about it, I have not changed any BIOS settings other than overclocking the cpu.

Any advice will be executed and appreciated.

-mike

EDIT: Found out that it does not always turn on before POST, just had it turn on for the first 10~ seconds after pressing the power button. Also, when the pump light is on the fans run perfectly, after the light shuts off they rev up to 100% and pulse ever so slightly.
a b à CPUs
May 21, 2013 11:35:37 AM

Have you tried using a differnt power connector for your pump?
!