AMD 8350 - Overclocking Question

Tsunesko

Honorable
May 12, 2013
17
0
10,510
So I have a SABERTOOTH Gen3 with an AMD-8350 cooled with a H100i.
I am trying to get a good stable OC and I thought I should start at 4.6
But I'm stuck at 4.6 with a Vcore of 1.475
Is this too high? Am I ok?
Should I go up?! :D

PS: PSU is an ULTRA X4 850w Bronze :??:

Also Load temp is at 45c with 15mins, 51c with 30mins, in Prime95. Blend test
 
Solution
My 8350 is running at 4,628 Mhz and 1.452 Vcore on a Sabertooth R2.0 with just a Hyper 212 Evo in push/pull. My temps with IBT are 61C after an hour. In normal everyday usage the most I have seen was 53C. That was after a few hours of Crysis 3.

I would say that everything seems fine. I would say your voltage is a bit high for your clockspeed but that could just be the nature of your particular 8350.

ish416

Honorable
Jul 5, 2012
771
0
11,360
My 8350 is running at 4,628 Mhz and 1.452 Vcore on a Sabertooth R2.0 with just a Hyper 212 Evo in push/pull. My temps with IBT are 61C after an hour. In normal everyday usage the most I have seen was 53C. That was after a few hours of Crysis 3.

I would say that everything seems fine. I would say your voltage is a bit high for your clockspeed but that could just be the nature of your particular 8350.
 
Solution

Tsunesko

Honorable
May 12, 2013
17
0
10,510


Thanks for the response!
Well I was thinking that maybe I can leave it here... I do want it for gaming more than anything, and it's working just fine!