usb error windows 8
- Thread starter MRINALINI
- Start date
Solution
Hello,
go to your my computer then write in the address bar G:\ then press enter
That might be simple solutions
Or
Access "Control Panel" from the Start menu and then choose "Performance and Maintenance."
2
Click "System" and then go to the Hardware tab and click on "Device Manager."
3
Find the device that is registering an error by expanding the nodes of the appropriate category. If the device has a red "X" on the icon next to its description, the hardware is disabled; proceed to Step 4 to enable it. Otherwise, go to Step 5.
4
Go to the General tab and click "Enable Device" found under the Device Status section; then press "OK." (Note: You may have to follow prompts, as indicated...
go to your my computer then write in the address bar G:\ then press enter
That might be simple solutions
Or
Access "Control Panel" from the Start menu and then choose "Performance and Maintenance."
2
Click "System" and then go to the Hardware tab and click on "Device Manager."
3
Find the device that is registering an error by expanding the nodes of the appropriate category. If the device has a red "X" on the icon next to its description, the hardware is disabled; proceed to Step 4 to enable it. Otherwise, go to Step 5.
4
Go to the General tab and click "Enable Device" found under the Device Status section; then press "OK." (Note: You may have to follow prompts, as indicated...
Shubham Verlekar
Honorable
- May 10, 2013
- 236
- 0
- 10,860
Hello,
go to your my computer then write in the address bar G:\ then press enter
That might be simple solutions
Or
Access "Control Panel" from the Start menu and then choose "Performance and Maintenance."
2
Click "System" and then go to the Hardware tab and click on "Device Manager."
3
Find the device that is registering an error by expanding the nodes of the appropriate category. If the device has a red "X" on the icon next to its description, the hardware is disabled; proceed to Step 4 to enable it. Otherwise, go to Step 5.
4
Go to the General tab and click "Enable Device" found under the Device Status section; then press "OK." (Note: You may have to follow prompts, as indicated through an enabling device wizard. If you do, continue to click "Next" and follow the prompts until the process has completed.) Test the hardware. If an error is shown, proceed to Step 5.
5
Go to the General tab and click "Troubleshoot" found under the Device Status section then press "OK." Follow the prompts to solve the issue. If an error is still shown, proceed to Step 6.
6
Go to the Driver tab and click "Update Driver." Follow the prompts until the process has completed and then test the hardware.
Regards and Enjoy
go to your my computer then write in the address bar G:\ then press enter
That might be simple solutions
Or
Access "Control Panel" from the Start menu and then choose "Performance and Maintenance."
2
Click "System" and then go to the Hardware tab and click on "Device Manager."
3
Find the device that is registering an error by expanding the nodes of the appropriate category. If the device has a red "X" on the icon next to its description, the hardware is disabled; proceed to Step 4 to enable it. Otherwise, go to Step 5.
4
Go to the General tab and click "Enable Device" found under the Device Status section; then press "OK." (Note: You may have to follow prompts, as indicated through an enabling device wizard. If you do, continue to click "Next" and follow the prompts until the process has completed.) Test the hardware. If an error is shown, proceed to Step 5.
5
Go to the General tab and click "Troubleshoot" found under the Device Status section then press "OK." Follow the prompts to solve the issue. If an error is still shown, proceed to Step 6.
6
Go to the Driver tab and click "Update Driver." Follow the prompts until the process has completed and then test the hardware.
Regards and Enjoy
Shubham Verlekar :
Hello,
go to your my computer then write in the address bar G:\ then press enter
That might be simple solutions
Or
Access "Control Panel" from the Start menu and then choose "Performance and Maintenance."
2
Click "System" and then go to the Hardware tab and click on "Device Manager."
3
Find the device that is registering an error by expanding the nodes of the appropriate category. If the device has a red "X" on the icon next to its description, the hardware is disabled; proceed to Step 4 to enable it. Otherwise, go to Step 5.
4
Go to the General tab and click "Enable Device" found under the Device Status section; then press "OK." (Note: You may have to follow prompts, as indicated through an enabling device wizard. If you do, continue to click "Next" and follow the prompts until the process has completed.) Test the hardware. If an error is shown, proceed to Step 5.
5
Go to the General tab and click "Troubleshoot" found under the Device Status section then press "OK." Follow the prompts to solve the issue. If an error is still shown, proceed to Step 6.
6
Go to the Driver tab and click "Update Driver." Follow the prompts until the process has completed and then test the hardware.
Regards and Enjoy
go to your my computer then write in the address bar G:\ then press enter
That might be simple solutions
Or
Access "Control Panel" from the Start menu and then choose "Performance and Maintenance."
2
Click "System" and then go to the Hardware tab and click on "Device Manager."
3
Find the device that is registering an error by expanding the nodes of the appropriate category. If the device has a red "X" on the icon next to its description, the hardware is disabled; proceed to Step 4 to enable it. Otherwise, go to Step 5.
4
Go to the General tab and click "Enable Device" found under the Device Status section; then press "OK." (Note: You may have to follow prompts, as indicated through an enabling device wizard. If you do, continue to click "Next" and follow the prompts until the process has completed.) Test the hardware. If an error is shown, proceed to Step 5.
5
Go to the General tab and click "Troubleshoot" found under the Device Status section then press "OK." Follow the prompts to solve the issue. If an error is still shown, proceed to Step 6.
6
Go to the Driver tab and click "Update Driver." Follow the prompts until the process has completed and then test the hardware.
Regards and Enjoy
sir thnkyou for the solution, but im still getting the same error message. is it possible that my pen drive is damaged permanently??
Shubham Verlekar
Honorable
- May 10, 2013
- 236
- 0
- 10,860
MRINALINI :
Shubham Verlekar :
Hello,
go to your my computer then write in the address bar G:\ then press enter
That might be simple solutions
Or
Access "Control Panel" from the Start menu and then choose "Performance and Maintenance."
2
Click "System" and then go to the Hardware tab and click on "Device Manager."
3
Find the device that is registering an error by expanding the nodes of the appropriate category. If the device has a red "X" on the icon next to its description, the hardware is disabled; proceed to Step 4 to enable it. Otherwise, go to Step 5.
4
Go to the General tab and click "Enable Device" found under the Device Status section; then press "OK." (Note: You may have to follow prompts, as indicated through an enabling device wizard. If you do, continue to click "Next" and follow the prompts until the process has completed.) Test the hardware. If an error is shown, proceed to Step 5.
5
Go to the General tab and click "Troubleshoot" found under the Device Status section then press "OK." Follow the prompts to solve the issue. If an error is still shown, proceed to Step 6.
6
Go to the Driver tab and click "Update Driver." Follow the prompts until the process has completed and then test the hardware.
Regards and Enjoy
go to your my computer then write in the address bar G:\ then press enter
That might be simple solutions
Or
Access "Control Panel" from the Start menu and then choose "Performance and Maintenance."
2
Click "System" and then go to the Hardware tab and click on "Device Manager."
3
Find the device that is registering an error by expanding the nodes of the appropriate category. If the device has a red "X" on the icon next to its description, the hardware is disabled; proceed to Step 4 to enable it. Otherwise, go to Step 5.
4
Go to the General tab and click "Enable Device" found under the Device Status section; then press "OK." (Note: You may have to follow prompts, as indicated through an enabling device wizard. If you do, continue to click "Next" and follow the prompts until the process has completed.) Test the hardware. If an error is shown, proceed to Step 5.
5
Go to the General tab and click "Troubleshoot" found under the Device Status section then press "OK." Follow the prompts to solve the issue. If an error is still shown, proceed to Step 6.
6
Go to the Driver tab and click "Update Driver." Follow the prompts until the process has completed and then test the hardware.
Regards and Enjoy
sir thnkyou for the solution, but im still getting the same error message. is it possible that my pen drive is damaged permanently??
Hello Once again MRINALINI,
Yes its Dead I think
Replace if it have Warrenty
Please choose this as best solution so that it could help others
Regards and Enjoy
TRENDING THREADS
-
[SOLVED] Is it safe to use a recapped PSU for a long time ?- Started by zwtch_17
- Replies: 5
-
Discussion What's your favourite video game you've been playing?- Started by amdfangirl
- Replies: 3K
-
News Microsoft updates Windows 11 24H2 requirements, CPU must support SSE4.2 or the OS will not boot- Started by Admin
- Replies: 19
-
Question User RX 580 8gb red devil powercolor, asking original BIOS- Started by PizzaInGame
- Replies: 7
-
Latest posts
-
-
-
Question Daisy chaining fans without ARGB and left with one male connector- Latest: Dampfkaessel
-
Question Where to find replacement ear pads for my headset ?
- Latest: ohio_buckeye
-
Facebook
Twitter
Instagram