P powerzone Honorable May 14, 2013 29 0 10,530 May 15, 2013 #1 hello I have a gybabye 970A-D3 REV1.4 With amd 8350 @4.5ghz my memory is at 1600mhz but i can't put my memory to 1600 because my board tell me "boot failure because overclocking and put this to 1333 mhz what can i do ?
hello I have a gybabye 970A-D3 REV1.4 With amd 8350 @4.5ghz my memory is at 1600mhz but i can't put my memory to 1600 because my board tell me "boot failure because overclocking and put this to 1333 mhz what can i do ?
Basel Abu Al-Adas Honorable May 15, 2013 65 0 10,630 May 15, 2013 #2 what brand of memory are you using? is it an overclocked edition? and try updating your bios Upvote 0 Downvote
P powerzone Honorable May 14, 2013 29 0 10,530 May 15, 2013 #3 kingston hyperx 1600mhz Upvote 0 Downvote
P powerzone Honorable May 14, 2013 29 0 10,530 May 15, 2013 #4 i have using this memory at 1600mhz with amd 965 and not problem but with amd 8350 i cant Upvote 0 Downvote
Basel Abu Al-Adas Honorable May 15, 2013 65 0 10,630 May 15, 2013 #5 it has nothing to do with the CPU, try resetting your CMOS and updating the bios Upvote 0 Downvote
P powerzone Honorable May 14, 2013 29 0 10,530 May 15, 2013 #6 OK THANK U VERY MUCH Upvote 0 Downvote
BerylLee Distinguished Feb 10, 2011 577 0 19,010 May 15, 2013 #7 to reach 1600MHz, not only get it by enabling xmp, you need to higher cpu ratio to reach memory requirement. Upvote 0 Downvote
to reach 1600MHz, not only get it by enabling xmp, you need to higher cpu ratio to reach memory requirement.