questions about Obsidian 350D

iBlitz

Honorable
Mar 16, 2013
144
0
10,680
hello everyone i just need to know some things about the 350D :)

here's my questions:

1. Regarding front fan can it be changed to 2 120mm?

2. How does the air penetrate the front panel?

3. do high end GPU cards fit?

4. will CM hyper 212 evo turbo fit?


thanks everyone :)
 
Solution
@iBlitz g-unit has already answered these fairly well but:

3. Yes, it supports GPUs of up to 380mm in length (which I believe is much larger than the largest current GPUs out there).

4. Yes, the maximum supported CPU cooler height is 160mm, and the Hyper 212 Evo is 159mm, so it will fit.

You can get all this info on the spec sheet though, so try reading that next time :p

No it doesn't support bottom fans, but I don't see the point in having them either. With 5 fans installed (if you plan on going for the max possible) there will be tons of airflow through the case. Just make sure you pick out some high quality fans.

All the best,

M

marshallbradley

Honorable
Sep 24, 2012
746
0
11,060
@iBlitz Here are the possible fan configurations for the 350D:

Front: 2 x 120mm or 2 x 140mm
Top: 2 x 120mm or 2 x 140mm
Rear: 1 x 120mm

Source.

In regards to your second question, since it doesn't have a mesh front, the air flows through the gap which surrounds the entire facade of the case.

M
 

marshallbradley

Honorable
Sep 24, 2012
746
0
11,060
@iBlitz g-unit has already answered these fairly well but:

3. Yes, it supports GPUs of up to 380mm in length (which I believe is much larger than the largest current GPUs out there).

4. Yes, the maximum supported CPU cooler height is 160mm, and the Hyper 212 Evo is 159mm, so it will fit.

You can get all this info on the spec sheet though, so try reading that next time :p

No it doesn't support bottom fans, but I don't see the point in having them either. With 5 fans installed (if you plan on going for the max possible) there will be tons of airflow through the case. Just make sure you pick out some high quality fans.

All the best,

M
 
Solution