- May 21, 2013
- 3
- 0
- 10,510
I have recently upgraded my HP Pavilion computer by putting in some more RAM and an Nvidia Geforce GT630 2GB in the PCI-E 16x slot. The RAM was no problem and works fine.
However, when I try to boot with the gfx card in situ I get the POST and then black screen whilst windows boots (I can hear the entry music on boot). I have tried the following:
1. Disabled and uninstalled integrated graphics
2. Upgraded PSU to 500W
3. Tried a 650W PSU just in case
I can't install the Nvidia drivers as I can't see to install them and it won't let me when the card is not plugged in.
Specs: HP Pavilion p6-2000ukm
Foxconn H-CUPERTINO2-H61-uA TX motherboard
8GB DDR3 1330 MHz RAM
500W PSU (Don't have exact model number to hand)
Any help greatly appreciated as I have been tackling this for hours now!
However, when I try to boot with the gfx card in situ I get the POST and then black screen whilst windows boots (I can hear the entry music on boot). I have tried the following:
1. Disabled and uninstalled integrated graphics
2. Upgraded PSU to 500W
3. Tried a 650W PSU just in case
I can't install the Nvidia drivers as I can't see to install them and it won't let me when the card is not plugged in.
Specs: HP Pavilion p6-2000ukm
Foxconn H-CUPERTINO2-H61-uA TX motherboard
8GB DDR3 1330 MHz RAM
500W PSU (Don't have exact model number to hand)
Any help greatly appreciated as I have been tackling this for hours now!
Facebook
Twitter
Instagram