Building a PC (Litecoin Miner) Monitor showing "No signal"

Hello. I am currently building a PC with the following components:

Motherboard: Gigabyte 990FXA-UD3
PSU: Corsair AW1200
CPU: AMD Sempron 145 2.8GHz
RAM: 8GB
GPU: AMD Radeon 7850

I have connected the PSU to the motherboard (24 Pin and 8 Pin), PSU to HDD, PSU to GPU. The PC does boot up but the monitor does not show anything. I know the issue is not with the monitor or GPU because they both work on my old motherboard (in fact i am using them now) but for some reason when they are connected to my new motherboard i get nothing. What could the problem be please? Thanks
3 answers Last reply
More about building litecoin miner monitor showing signal
  1. Do you have another GPU that you can install to verify that the PC actually works?
  2. yes... tried an older gpu... didnt work
  3. That would indicate a problem with the motherboard or CPU.

    Go through this guide for troubleshooting help. If that fails to solve the problem, come back for more assistance.

    http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems
Ask a new question

Read More

GPUs Components Monitors Motherboards Systems