Sign in with
Sign up | Sign in
Your question

Multiple Mouse cut in and out (W7)

Last response: in Components
Share
May 25, 2013 1:06:32 PM

I have a Logitech G9x which all of a sudden a few days ago starting cutting in and out. Randomly mind.

I have since tried the following:
Taking it out of my USB hub and plugging into a different port.
Changing the mouse too two different spare ones which had no change.
Turning off save power management in device manager.

The issue is quite frustrating as it's happening quite a bit. Anyone know the issue?

Mind, the keyboard and headset is unaffected.

More about : multiple mouse cut

May 25, 2013 1:16:28 PM

does the led on the mouse goes out when it cut ?
m
0
l
May 25, 2013 1:23:37 PM

What's the brand and model of the motherboard?

What other components do you have installed in the motherboard's expansion slots? Which expansion slots have a card installed in them?
m
0
l
Related resources
May 25, 2013 1:50:40 PM

LED does go out on the mouse.

Brand of the motherboard is Gigabyte ud3h-b3, Computer is about 18months old.

Expansions: Nothing other then the basic computer stuff (GPU, CPU, RAM ect) and the case ports/buttons.
m
0
l
May 25, 2013 1:53:48 PM

we will try something look like mouse connector loose power there are the 2 external pins on the usb cable that give power you will gently lift them a little bit with a small flat screwdriver same kind use for glass lens repair that should correct your issue .
m
0
l
May 25, 2013 2:08:16 PM

Sorry, I do not understand what you mean.
m
0
l
May 25, 2013 2:15:31 PM

see this in the usb cable the 2 external one give power to the device sometimes the little flat pin do not made contact anymore that why i suggest you to lift them up a little bit so mouse could receive power from the system http://www.usbpinout.net/
m
0
l
May 25, 2013 2:18:11 PM

Could also be a broken/intermittent cable where it enters the mouse.
m
0
l
May 25, 2013 2:27:04 PM

it will need a votmeter to test both end of the cable .
m
0
l
May 26, 2013 12:56:53 AM

scout_03 said:
see this in the usb cable the 2 external one give power to the device sometimes the little flat pin do not made contact anymore that why i suggest you to lift them up a little bit so mouse could receive power from the system http://www.usbpinout.net/


I will try this, but why would it happen too three difference mice in different USB ports?
m
0
l
May 26, 2013 12:41:03 PM

i would check the peripheral if there is any ? mark under the usb controller if not there could be a issue with your motherboard usb connector .
m
0
l
!