Sign in with
Sign up | Sign in
Your question
Solved

How to know my motherboard failed?

Last response: in Motherboards
Share
May 26, 2013 6:32:12 AM

My pc specs:
intel dh61ww motherboard
Core i3 2100 cpu
Nvidia geforce gtx650 ti boost
Transcend 4gb ram
Corsair cx500
I couldnt start my computer today morning, the processor fans and graphic card fan was not working.i thought that may be power supply has failed . Then i changed the power supply with vip 400 the processor fan started but i heard some 3-4 beeps.
I wanted to know whats the problem and does the psu fail harms the hard disk, motherboard , graphic card and processor?

More about : motherboard failed

May 26, 2013 6:40:08 AM

Im getting 2 long beeps and a pause then 2 long beeps..
I wanted to know how do i knw that my processor and graphic card are fine
Related resources

Best solution

a c 554 V Motherboard
a c 113 à CPUs
May 26, 2013 6:45:34 AM
Share

It looks like a graphics issue. Have you tried removing the NVidia card and using the onboard graphics?
May 26, 2013 6:47:37 AM

Ya the beep pattern i told u is without the graphic card...i uninstalled it as the vip has only 400 watts
a c 554 V Motherboard
a c 113 à CPUs
May 26, 2013 6:56:40 AM

If you remove all memory modules, what's the beeps pattern?
May 26, 2013 6:58:02 AM

Does anyone know where do i claim my warranty for corsair and intel motherboard. I live in mumbai
May 26, 2013 7:07:27 AM

Im getting three short beeps pause three short beeps pause continuously..with ram , graphic card &hard disk unplugged
a c 554 V Motherboard
a c 113 à CPUs
May 26, 2013 7:13:12 AM

I suggest clearing the CMOS (unplug the power cord and remove the CMOS battery for few minutes) then installing single RAM module and starting the board. See if still 2 long beeps.
I guess that the motherboard is OK.
a c 105 V Motherboard
a b à CPUs
May 26, 2013 9:07:29 AM

sohail19 said:
Does anyone know where do i claim my warranty for corsair and intel motherboard. I live in mumbai


You should be able to get a RMA authorization of your equipment at the web sites of the manufacturers.
May 27, 2013 3:31:21 AM

alexoiu said:
I suggest clearing the CMOS (unplug the power cord and remove the CMOS battery for few minutes) then installing single RAM module and starting the board. See if still 2 long beeps.
I guess that the motherboard is OK.


After removing the cmos battery for few minites i reinstalled the battery and the ram ..still im getting 2 long beeps pause 2 long beeps.
a c 554 V Motherboard
a c 113 à CPUs
May 27, 2013 5:57:11 AM

It could be the board though or the processor, since neither the graphics card nor the onboard graphics do work.
Hard to say which one without swapping components and testing.
A local shop might help or try RMA-ing both motherboard and CPU. Not sure about the graphics card also.
It seems that the power failure damaged more than the power supply.
May 27, 2013 7:23:19 AM

alexoiu said:
It could be the board though or the processor, since neither the graphics card nor the onboard graphics do work.
Hard to say which one without swapping components and testing.
A local shop might help or try RMA-ing both motherboard and CPU. Not sure about the graphics card also.
It seems that the power failure damaged more than the power supply.


i managed to start my computer ... actually i had changed the settings in the bios for onboard graphics to always diable long time ago, i think that might be conflicting to start up my computer with the onboard graphics ,now i installed a spare graphic card and the pc started all normal,, now i think only my nvidia gtx 650 ti boost and corsair cx500 is damaged... looking at my pc specs is the powersupply sufficient and good enough to run the gtx 650 ti boost with my current mobo and processor, i doubt my powersupply isnt sufficient enough thats why it failed...
a c 554 V Motherboard
a c 113 à CPUs
May 27, 2013 8:05:24 AM

By clearing the CMOS, the BIOS settings (set to default) should have allowed the onboard graphics. Weird.
Great idea to test a different graphics card.
May 27, 2013 8:10:59 AM

alexoiu said:
By clearing the CMOS, the BIOS settings (set to default) should have allowed the onboard graphics. Weird.
Great idea to test a different graphics card.

I did as u said removing the battery for a few minutes ..but it didnt work..is my processor and motherboard good enough to run nvidia gtx 650ti boost
a c 554 V Motherboard
a c 113 à CPUs
May 27, 2013 8:25:25 AM

Yes, they are. Even the CX 500 should support it, but it seems that yours didn't.
Will you RMA the card and the power supply?
May 27, 2013 9:30:09 AM

alexoiu said:
Yes, they are. Even the CX 500 should support it, but it seems that yours didn't.
Will you RMA the card and the power supply?


I think my graphic card will be ok.. As i dont have a higher watt psu rite now to test it.. Ill replace the corsair power supply tomorrow
!