bigshootr8 :
You shouldn't have an issue placing the 24 pin in it should fit nice and snug may need some force but not much. Also, your motherboard doesn't need the front panel connectors to test if it will turn on. The top right the red one is a power button its primarily good in test benches. Just ensure both the 8 pin and the 24 pin are in correctly you have your ram placed in correctly take your motherboard manual out power your machine and when your machine turns back a number look in your motherboard manual to see what it means your motherboard has a debug number on the bottom right that outputs what is the current happenings with your machine.
UPDATE: I switched to a 575 Watt PSU, and pushed the power button. My fans and LED lights are running, but I'm not getting any signal from the monitor. And, my front panel lights don't come on.
I've also tried resetting my CMOS, via the jumper and via removing the battery, but no luck there, either.
Still no POST. DOES beep without RAM. When I put it back in, I get silence.
Any ideas on what I should do?
This is my board:
http://2.bp.blogspot.com/-UDyW4VRBYzA/UH5-86s5OmI/AAAAAAAAFOA/UqdVTcXaV9w/s1600/132a+(1).jpg