- Jun 5, 2013
- 75
- 0
- 10,660
I just finished cloning a 200GB PATA HDD to a 2TB SATA HDD (Acronis 2013) and installing it into a computer using a SATA to PATA adapter.
Eg. http://www.ebay.com/itm/PATA-IDE-TO-SATA-Adapter-Converter-For-3-5-HDD-/260811145943
Windows (XP SP3) attempts to boot and BSOD's shortly after.
Rather than installing the operating system on the 2TB I'd prefer to attempt to get the OS working as is.
Is there any Recovery console work I could do to fix this or some manual driver injecting in another PC externally?
The 200GB IDE source for the clone boots fine.
Safe mode is the same.
Reason is; internal protocol forbids me from performing re-installation.
Eg. http://www.ebay.com/itm/PATA-IDE-TO-SATA-Adapter-Converter-For-3-5-HDD-/260811145943
Windows (XP SP3) attempts to boot and BSOD's shortly after.
Rather than installing the operating system on the 2TB I'd prefer to attempt to get the OS working as is.
Is there any Recovery console work I could do to fix this or some manual driver injecting in another PC externally?
The 200GB IDE source for the clone boots fine.
Safe mode is the same.
Reason is; internal protocol forbids me from performing re-installation.
Facebook
Twitter
Instagram