Solved

please help me to select the appropriate RAM upgrade, which one i should buy ?

RAMMon v1.0 Build: 1009 built with SysInfo v1.0 Build: 1030
PassMark (R) Software
www.passmark.com

Memmory summary for ANKIT-HP:
Number of Memory Devices: 1 Total Physical Memory: 4043 MB (4096 MB)
Total Available Physical Memory: 2355 MB
Memory Load: 41%

Item | Module #1 |
-------------------------------------------------------------------------------|-----------------------|-
Ram Type | DDR3 |
Maximum Clock Speed (MHz) | 666.67 (JEDEC) |
Maximum Transfer Speed (MHz) | DDR3-1333 |
Maximum Bandwidth (MB/s) | PC3-10666 |
Memory Capacity (MB) | 4096 |
Jedec Manufacture Name | Samsung |
Search Amazon.com | Search! |
SPD Revision | 1.0 |
Registered | No |
ECC | No |
DIMM Slot # | 3 |
Manufactured | Week 6 of Year 2011 |
Module Part # | M471B5273CH0-CH9 |
Module Revision | 0x0 |
Module Serial # | 0x8460B31F |
Module Manufacturing Location | 2 |
# of Row Addressing Bits | 15 |
# of Column Addressing Bits | 10 |
# of Banks | 8 |
# of Ranks | 2 |
Device Width in Bits | 8 |
Bus Width in Bits | 64 |
Module Voltage | 1.5V |
CAS Latencies Supported | 5 6 7 8 9 |
Timings @ Max Frequency (JEDEC) | 9-9-9-24 |
Maximum frequency (MHz) | 666.67 |
Maximum Transfer Speed (MHz) | DDR3-1333 |
Maximum Bandwidth (MB/s) | PC3-10666 |
Minimum Clock Cycle Time, tCK (ns) | 1.500 |
Minimum CAS Latency Time, tAA (ns) | 13.125 |
Minimum RAS to CAS Delay, tRCD (ns) | 13.125 |
Minimum Row Precharge Time, tRP (ns) | 13.125 |
Minimum Active to Precharge Time, tRAS (ns) | 36.000 |
Minimum Row Active to Row Active Delay, tRRD (ns) | 6.000 |
Minimum Auto-Refresh to Active/Auto-Refresh Time, tRC (ns) | 49.125 |
Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC (ns) | 160.000 |
| |
DDR3 Specific SPD Attributes | |
Write Recovery Time, tWR (ns) | 15.000 |
Internal Write to Read Command Delay, tWTR (ns) | 7.500 |
Internal Read to Precharge Command Delay, tRTP (ns) | 7.500 |
Minimum Four Activate Window Delay, tFAW (ns) | 30.000 |
RZQ / 6 Supported | Yes |
RZQ / 7 Supported | Yes |
DLL-Off Mode Supported | Yes |
Maximum Operating Temperature (C) | 95 |
Refresh Rate at Extended Operating Temperature Range | 1X |
Auto-self Refresh Supported | No |
On-die Thermal Sensor Readout Supported | No |
Partial Array Self Refresh Supported | No |
Thermal Sensor Present | No |
Non-standard SDRAM Type | Standard Monolithic |
Module Type | SO-DIMM |
Module Height (mm) | 30 |
Module Thickness (front), (mm) | 2 |
Module Thickness (back), (mm) | 2 |
Module Width (mm) | 67.6 |
Reference Raw Card Used | Raw Card F Rev. 2 |
DRAM Manufacture ID | 32974 |
# of DRAM Rows | 0 |
# of Registers | 0 |
Register Manufacturer | |
Register Type | |
Register Revision | 0 |
3 answers Last reply Best Answer
More about select ram upgrade buy
  1. :welcome:
    fifaboy said:
    RAMMon v1.0 Build: 1009 built with SysInfo v1.0 Build: 1030
    PassMark (R) Software
    www.passmark.com

    Memmory summary for ANKIT-HP:
    Number of Memory Devices: 1 Total Physical Memory: 4043 MB (4096 MB)
    Total Available Physical Memory: 2355 MB
    Memory Load: 41%

    Item | Module #1 |
    -------------------------------------------------------------------------------|-----------------------|-
    Ram Type | DDR3 |
    Maximum Clock Speed (MHz) | 666.67 (JEDEC) |
    Maximum Transfer Speed (MHz) | DDR3-1333 |
    Maximum Bandwidth (MB/s) | PC3-10666 |
    Memory Capacity (MB) | 4096 |
    Jedec Manufacture Name | Samsung |
    Search Amazon.com | Search! |
    SPD Revision | 1.0 |
    Registered | No |
    ECC | No |
    DIMM Slot # | 3 |
    Manufactured | Week 6 of Year 2011 |
    Module Part # | M471B5273CH0-CH9 |
    Module Revision | 0x0 |
    Module Serial # | 0x8460B31F |
    Module Manufacturing Location | 2 |
    # of Row Addressing Bits | 15 |
    # of Column Addressing Bits | 10 |
    # of Banks | 8 |
    # of Ranks | 2 |
    Device Width in Bits | 8 |
    Bus Width in Bits | 64 |
    Module Voltage | 1.5V |
    CAS Latencies Supported | 5 6 7 8 9 |
    Timings @ Max Frequency (JEDEC) | 9-9-9-24 |
    Maximum frequency (MHz) | 666.67 |
    Maximum Transfer Speed (MHz) | DDR3-1333 |
    Maximum Bandwidth (MB/s) | PC3-10666 |
    Minimum Clock Cycle Time, tCK (ns) | 1.500 |
    Minimum CAS Latency Time, tAA (ns) | 13.125 |
    Minimum RAS to CAS Delay, tRCD (ns) | 13.125 |
    Minimum Row Precharge Time, tRP (ns) | 13.125 |
    Minimum Active to Precharge Time, tRAS (ns) | 36.000 |
    Minimum Row Active to Row Active Delay, tRRD (ns) | 6.000 |
    Minimum Auto-Refresh to Active/Auto-Refresh Time, tRC (ns) | 49.125 |
    Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC (ns) | 160.000 |
    | |
    DDR3 Specific SPD Attributes | |
    Write Recovery Time, tWR (ns) | 15.000 |
    Internal Write to Read Command Delay, tWTR (ns) | 7.500 |
    Internal Read to Precharge Command Delay, tRTP (ns) | 7.500 |
    Minimum Four Activate Window Delay, tFAW (ns) | 30.000 |
    RZQ / 6 Supported | Yes |
    RZQ / 7 Supported | Yes |
    DLL-Off Mode Supported | Yes |
    Maximum Operating Temperature (C) | 95 |
    Refresh Rate at Extended Operating Temperature Range | 1X |
    Auto-self Refresh Supported | No |
    On-die Thermal Sensor Readout Supported | No |
    Partial Array Self Refresh Supported | No |
    Thermal Sensor Present | No |
    Non-standard SDRAM Type | Standard Monolithic |
    Module Type | SO-DIMM |
    Module Height (mm) | 30 |
    Module Thickness (front), (mm) | 2 |
    Module Thickness (back), (mm) | 2 |
    Module Width (mm) | 67.6 |
    Reference Raw Card Used | Raw Card F Rev. 2 |
    DRAM Manufacture ID | 32974 |
    # of DRAM Rows | 0 |
    # of Registers | 0 |
    Register Manufacturer | |
    Register Type | |
    Register Revision | 0 |

    Could you let me know your system (laptop) model name and number (or you could let me know your motherboard model name and number if it is a desktop) without which I may not be able to help. :sad: Looking forward to your reply.
  2. Legohouse said:
    :welcome:
    fifaboy said:
    RAMMon v1.0 Build: 1009 built with SysInfo v1.0 Build: 1030
    PassMark (R) Software
    www.passmark.com

    Memmory summary for ANKIT-HP:
    Number of Memory Devices: 1 Total Physical Memory: 4043 MB (4096 MB)
    Total Available Physical Memory: 2355 MB
    Memory Load: 41%

    Item | Module #1 |
    -------------------------------------------------------------------------------|-----------------------|-
    Ram Type | DDR3 |
    Maximum Clock Speed (MHz) | 666.67 (JEDEC) |
    Maximum Transfer Speed (MHz) | DDR3-1333 |
    Maximum Bandwidth (MB/s) | PC3-10666 |
    Memory Capacity (MB) | 4096 |
    Jedec Manufacture Name | Samsung |
    Search Amazon.com | Search! |
    SPD Revision | 1.0 |
    Registered | No |
    ECC | No |
    DIMM Slot # | 3 |
    Manufactured | Week 6 of Year 2011 |
    Module Part # | M471B5273CH0-CH9 |
    Module Revision | 0x0 |
    Module Serial # | 0x8460B31F |
    Module Manufacturing Location | 2 |
    # of Row Addressing Bits | 15 |
    # of Column Addressing Bits | 10 |
    # of Banks | 8 |
    # of Ranks | 2 |
    Device Width in Bits | 8 |
    Bus Width in Bits | 64 |
    Module Voltage | 1.5V |
    CAS Latencies Supported | 5 6 7 8 9 |
    Timings @ Max Frequency (JEDEC) | 9-9-9-24 |
    Maximum frequency (MHz) | 666.67 |
    Maximum Transfer Speed (MHz) | DDR3-1333 |
    Maximum Bandwidth (MB/s) | PC3-10666 |
    Minimum Clock Cycle Time, tCK (ns) | 1.500 |
    Minimum CAS Latency Time, tAA (ns) | 13.125 |
    Minimum RAS to CAS Delay, tRCD (ns) | 13.125 |
    Minimum Row Precharge Time, tRP (ns) | 13.125 |
    Minimum Active to Precharge Time, tRAS (ns) | 36.000 |
    Minimum Row Active to Row Active Delay, tRRD (ns) | 6.000 |
    Minimum Auto-Refresh to Active/Auto-Refresh Time, tRC (ns) | 49.125 |
    Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC (ns) | 160.000 |
    | |
    DDR3 Specific SPD Attributes | |
    Write Recovery Time, tWR (ns) | 15.000 |
    Internal Write to Read Command Delay, tWTR (ns) | 7.500 |
    Internal Read to Precharge Command Delay, tRTP (ns) | 7.500 |
    Minimum Four Activate Window Delay, tFAW (ns) | 30.000 |
    RZQ / 6 Supported | Yes |
    RZQ / 7 Supported | Yes |
    DLL-Off Mode Supported | Yes |
    Maximum Operating Temperature (C) | 95 |
    Refresh Rate at Extended Operating Temperature Range | 1X |
    Auto-self Refresh Supported | No |
    On-die Thermal Sensor Readout Supported | No |
    Partial Array Self Refresh Supported | No |
    Thermal Sensor Present | No |
    Non-standard SDRAM Type | Standard Monolithic |
    Module Type | SO-DIMM |
    Module Height (mm) | 30 |
    Module Thickness (front), (mm) | 2 |
    Module Thickness (back), (mm) | 2 |
    Module Width (mm) | 67.6 |
    Reference Raw Card Used | Raw Card F Rev. 2 |
    DRAM Manufacture ID | 32974 |
    # of DRAM Rows | 0 |
    # of Registers | 0 |
    Register Manufacturer | |
    Register Type | |
    Register Revision | 0 |

    Could you let me know your system (laptop) model name and number (or you could let me know your motherboard model name and number if it is a desktop) without which I may not be able to help. :sad: Looking forward to your reply.


    Its HP Pavillion g6 -1004tx . Hope this works :ange:
  3. Best answer
    fifaboy said:

    Its HP Pavillion g6 -1004tx . Hope this works :ange:

    Yes, that is the correct model number!:benetton: HP Pavilion g6-1004tx Notebook supports a maximum memory of "8GB" and has two slot for memory. Each slot can take upto 4GB. Since, you already have 4GB DDR3-1333MHz memory installed, I would suggest you to go with 4GB of the same speed. Mixing brands is kinda okay but sometimes some models can be picky so if you decide to stick with the same brand (the current brand is Samsung) that should be better. You could try this website for compatible 4GB memory- Click here!!
    You may also check with Kingston. Good luck with the upgrade and hope everything works as planned. Cheers:cheese:
Ask a new question

Read More

HP Pavilion g6-1004tx Memory