Hello guys,
I recently updated my BIOS to support UEFI, installed Windows 8, everything were fine (lie, it took a while to get things running), but I still have some problems running.
Settings:
MOBO: Gigabyte GA-Z68MA-D2H-B3 (rev 1.0)
CPU: Intel Core i7 2600k
RAM: 8 GB DDR3 1333 Mhz
HDD: 3x SAMSUNG 500gb RAID-0 Mode
GPU: Nvidia Geforce 9800 GTX+
Power Supply: CORSAIR 650W
1) When I turn on my computer, it doesn't run USB/PS2 acessories (yes, yes, those are enabled on BIOS system). The PS2 Mouse won't run even after Windows boot. The USB Keyboard works. I can't get into BIOS by the first try, I have to disconnect my HDD, let the system boot into BIOS, then reconnect HDD and it works (USB + PS2 Running fine).
2) When I shutdown my computer, it keeps everything running, except OS. I mean, the OS shutdown itself, but the power supply, fans and leds keeps running.
I've searched a while, but couldn't find a solution for these. Can you guys help me out?
Thanks in advance!
I recently updated my BIOS to support UEFI, installed Windows 8, everything were fine (lie, it took a while to get things running), but I still have some problems running.
Settings:
MOBO: Gigabyte GA-Z68MA-D2H-B3 (rev 1.0)
CPU: Intel Core i7 2600k
RAM: 8 GB DDR3 1333 Mhz
HDD: 3x SAMSUNG 500gb RAID-0 Mode
GPU: Nvidia Geforce 9800 GTX+
Power Supply: CORSAIR 650W
1) When I turn on my computer, it doesn't run USB/PS2 acessories (yes, yes, those are enabled on BIOS system). The PS2 Mouse won't run even after Windows boot. The USB Keyboard works. I can't get into BIOS by the first try, I have to disconnect my HDD, let the system boot into BIOS, then reconnect HDD and it works (USB + PS2 Running fine).
2) When I shutdown my computer, it keeps everything running, except OS. I mean, the OS shutdown itself, but the power supply, fans and leds keeps running.
I've searched a while, but couldn't find a solution for these. Can you guys help me out?
Thanks in advance!
The system were working OK with 1 HDD, and I had a lot of trouble to configure RAID-0 with UEFI (when i changed SATA Controller to RAID instead of AHCI, everything went down...). Now it's working with RAID-0, except for these reasons. I can't have another RAID-0 configuration to test. Do you have another solution in mind?
Facebook
Twitter
Instagram