Sign in with
Sign up | Sign in
Your question
Solved

Installed a new PSU, now DVD player doesn't work, NEED HELP

Last response: in Components
Share
June 10, 2013 2:30:12 PM

I installed a Corsair TX650 watt PSU and hooked everything up, including my DVD player, and when I start my computer up I get a Code 19 in device manager underneath the DVD/CD-ROM drives tab "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)" I have tried to update drivers, uninstall them and then restart my computer (when drivers try to install, it said the installation failed). My DVD player opens, but it does not run the disk. I need help!
June 10, 2013 2:35:47 PM

changing your power supply should have nothing to do with any drivers that allow your optical drive to work

are you sure it's connected properly and securely to both the new PS and the motherboard?

there seems to be something else you did or didn't know you did...
m
0
l
June 10, 2013 2:45:23 PM

dingo07 said:
changing your power supply should have nothing to do with any drivers that allow your optical drive to work

are you sure it's connected properly and securely to both the new PS and the motherboard?

there seems to be something else you did or didn't know you did...


Everything is securely connected. ATAPI iHAS324 B ATA Device <-- that is the name under my DVD/CD ROM in Device Manager. Every thing is secure and plugged in correctly. I first saw problems when I tried to install my new Radeon 7950 while I had my other graphics cards drivers still downloaded.
m
0
l
Related resources
June 10, 2013 2:47:53 PM

Uninstall the drive in the device manager then reboot.
m
0
l
June 10, 2013 2:49:29 PM

SR-71 Blackbird said:
Uninstall the drive in the device manager then reboot.


As stated on my original post, I already uninstalled the drivers and restarted my computer.
m
0
l
June 10, 2013 2:51:05 PM

SR-71 Blackbird said:
Uninstall the drive in the device manager then reboot.


if that doesn't work, boot into Safe Mode and do the same thing - make sure you have the correct and latest drivers to install
m
0
l

Best solution

June 10, 2013 2:54:15 PM
Share
June 10, 2013 3:09:47 PM

Sometimes the registry is glitchy with the drives.Used this solution 2 weeks ago when my power went out.

Most of the time it works.
m
0
l
!