First time builder. Installed Hyper 212 Evo Cooler. Have read forums and watched videos online. Worried because the lock is somewhat under one of the arms. The whole cooler itself appears even to me...I tightened it in the star method...but just curious if the lock next to the hole on the cooler where the retention plate goes into has to be visible (not underneath one of the arms).
Every time I tried to line up the arms and started screwing in the screws by the star method, one arm would move a little bit over the lock in order to have everything lined up. Using a LGA 1155 and plate/stand offs/screws on retention bracket all in line per instructions.
Don't want to go any further until it is right so any help will be appreciated.
Thanks!