I have a small case for my eMachines EL1352, it says my motherboard (or mainboard if that's the same thing) is EL1350 according to PC Wizard. Is it possible to get a bigger case for this motherboard? If there is a midsize case that will work with that motherboard, could you link me to a website or possibly some stores that usually sell them?
Case compatible with motherboard?
- Thread starter jackburg
- Start date
Solution
Searching deeper and I found the motherboard:
To be precise. it's a mATX board with lesser height than a normal one. Its mounting holes follow ITX standards. This means that any mini/mid/full tower case that support ITX boards will support the board inside your emachines. But an ITX case might not fit your board ( due to extended width and height ).
To be precise. it's a mATX board with lesser height than a normal one. Its mounting holes follow ITX standards. This means that any mini/mid/full tower case that support ITX boards will support the board inside your emachines. But an ITX case might not fit your board ( due to extended width and height ).
legokill101
Honorable
- Apr 10, 2013
- 2,020
- 0
- 12,160
spooky2th
Splendid
- May 18, 2010
- 4,855
- 1
- 26,960
Newegg has a good choice of comp cases.
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007583%20600006302&IsNodeId=1&name=ATX%20Mid%20Tower
MotherBoards too:
http://www.newegg.com/Motherboards/Category/ID-20
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007583%20600006302&IsNodeId=1&name=ATX%20Mid%20Tower
MotherBoards too:
http://www.newegg.com/Motherboards/Category/ID-20
Madn3ss795
Dignified
- Mar 19, 2013
- 2,715
- 0
- 13,960
Madn3ss795
Dignified
- Mar 19, 2013
- 2,715
- 0
- 13,960
Just do a bit Googling and it tells that your emachines case is a mini tower, meaning that the motherboard inside is in mATX form, which will fit in any cases that support mATX motherboards.
Madn3ss795
Dignified
- Mar 19, 2013
- 2,715
- 0
- 13,960
Searching deeper and I found the motherboard:
To be precise. it's a mATX board with lesser height than a normal one. Its mounting holes follow ITX standards. This means that any mini/mid/full tower case that support ITX boards will support the board inside your emachines. But an ITX case might not fit your board ( due to extended width and height ).
To be precise. it's a mATX board with lesser height than a normal one. Its mounting holes follow ITX standards. This means that any mini/mid/full tower case that support ITX boards will support the board inside your emachines. But an ITX case might not fit your board ( due to extended width and height ).
http://www.newegg.com/Product/Product.aspx?Item=N82E16883114085R
All of the mother boards in the EL-1352 series look the same.. I don't know which computer mine belongs to.
But are you sure those two motherboards are the same? The picture is in the gallery.
All of the mother boards in the EL-1352 series look the same.. I don't know which computer mine belongs to.
But are you sure those two motherboards are the same? The picture is in the gallery.
Madn3ss795
Dignified
- Mar 19, 2013
- 2,715
- 0
- 13,960
Madn3ss795
Dignified
- Mar 19, 2013
- 2,715
- 0
- 13,960
Madn3ss795
Dignified
- Mar 19, 2013
- 2,715
- 0
- 13,960
TRENDING THREADS
-
-
Question New installed W11 on sdd, D drive (HDD) goes to the 100% in seconds
- Started by Emily_Vin
- Replies: 8
-
-
Facebook
Twitter
Instagram