- Feb 3, 2013
- 216
- 0
- 10,710
1. Do all of the cores show temperatures show up for everyone on HWmonitor? Mine only has one universal temp reading.
2. Using this OC guide: http://www.overclock.net/t/1348623/amd-bulldozer-and-piledriver-overclocking-guide-asus-motherboard I can't get the voltages not to wildly jump around and I'm only attempting 4.5 GHz. When I prime test it using small FTT the voltages max and stabilize but when it's left with less then 100~98% load the voltages swing around again.
3. It hasn't failed an hour at large data on OCCT or 10min of small FTT on prime95.
Edit: 4. Prime 95 states that I'm using a bulldozer, does that happen for anyone else?
2. Using this OC guide: http://www.overclock.net/t/1348623/amd-bulldozer-and-piledriver-overclocking-guide-asus-motherboard I can't get the voltages not to wildly jump around and I'm only attempting 4.5 GHz. When I prime test it using small FTT the voltages max and stabilize but when it's left with less then 100~98% load the voltages swing around again.
3. It hasn't failed an hour at large data on OCCT or 10min of small FTT on prime95.
Edit: 4. Prime 95 states that I'm using a bulldozer, does that happen for anyone else?
Facebook
Twitter
Instagram