Solved

CPU vcore is screwing with me

Hello, im trying to fine tune my fx-6100 overclock since 1.440v on full load is a little bit too much, anyways.

On bios ive set the vcore to ;

Offset
+
0.12xxxx

I boot up, open CPUID, IDLE voltage is 1.43-1.44 and on load voltage is 1.36-1.38

same happens with manual voltage, i set it to 1.4 - it idles at 1.39-1.41 but when full load ( ibt / prime ) it drops to 1.35-1.36.

and yes i hate the latest bios.

it should be the damn opposite way ;_;
5 answers Last reply Best Answer
More about cpu vcore screwing
  1. That's called vDroop, what motherboard are you using?
  2. Asus m5a97 r2.0
  3. Did you turn off load line calibration?
  4. Yes

    edit : now ive enabled it and now it seems to be working "fine", my bad :D

    Thanks. :)
  5. Best answer
    chromic said:
    Yes

    edit : now ive enabled it and now it seems to be working "fine", my bad :D

    Thanks. :)

    No problem, you could mark one of my posts as answer to thank me ;).
Ask a new question

Read More

Overclocking BIOS CPUs