Overclocking a Pentium Dual-Core E2140 with intel PI945GCM motherboard.
- Thread starter dvl9719
- Start date
Solution
Software?
Well..You could raise the vcore a bit..
Download Setfsb and use that..
Try:
ICS9LPRS419DFLF or
CV110JPVG or
RTM866-485
RTM876-665
The real way to find your PLL is to look at the square chip that's near an oblong silver diode on your motherboard.If it has a Realtek monster or whatever..it'll be Realtek.
If not;Try to get the numbers off of the chip.
Well..You could raise the vcore a bit..
Download Setfsb and use that..
Try:
ICS9LPRS419DFLF or
CV110JPVG or
RTM866-485
RTM876-665
The real way to find your PLL is to look at the square chip that's near an oblong silver diode on your motherboard.If it has a Realtek monster or whatever..it'll be Realtek.
If not;Try to get the numbers off of the chip.
Ok..You download Setfsb here: http://www.tomsguide.com/us/download/SetFSB,0305-23048.html
then put those numbers into the box..and one should work.
Then you click the arrows to the right and "setfsb"
That's not an overclocking motherboard, but you should be able to get 200 Mhz or so
then put those numbers into the box..and one should work.
Then you click the arrows to the right and "setfsb"
That's not an overclocking motherboard, but you should be able to get 200 Mhz or so
TRENDING THREADS
-
-
-
Question Need help fixing Blank screen Secondary Monitor- Started by BlueDolphin69
- Replies: 4
-
-
-
Question gpu hotspot temperature reaches 110c. is it normal?
- Started by eziowar
- Replies: 7
-
RTX 4060 Ti vs RX 7700 XT faceoff: Which midrange graphics card is superior?- Started by Admin
- Replies: 17
Facebook
Twitter
Instagram