Hey guys, i'm in a real pickle here.
So I just finished my new build here are the specs:
I7 4770k @ stock
Assus sabertooth z87
2 samsung 840 pro in raid0
1 ocz vertex agility
Sli 780gtx superclocked
32gb of patriot viper (4dimms)
1500w silverstone psu
Swiftech h220
Nzxt phantom 820
It boots fine and I managed to install windows and get most of that working. However, the system seems to be incredibly unstable. What I mean by this is that trying to do windows updates will blue screen the system, updating graphic drivers, the system hardlocks, booting up allbenchmark crashes it after a 2 min black screen.
Now I spent all of yesterday on this trying to figure it out, I have reformatted three times now (all of different drives) with no avail. I also ran memtest86 over night and its currently still going after 9 hours and 15 minutes with 6 passes and no errors.
Prime95 will surprisingly also run fine (Although I only ran it for an hour). I'm completely lost on what to check next, I doubt its the 780's because it doesn't have anything to with windows updates and that bricks it.
It's also worth mentioning that I had troubles with the board as it wouldn't post unless the sata mode was AHCI instead of RAID and would just turn on the "Boot device LED" (Before windows was installed) unless I actually used the physical memtest button to boot it up. I cleared the CMOS to try to fix that with no avail, so i'm currently not running Raid.
Hopefully I can get an answer or some suggestions, cause i'm all out of them.
Thanks.
So I just finished my new build here are the specs:
I7 4770k @ stock
Assus sabertooth z87
2 samsung 840 pro in raid0
1 ocz vertex agility
Sli 780gtx superclocked
32gb of patriot viper (4dimms)
1500w silverstone psu
Swiftech h220
Nzxt phantom 820
It boots fine and I managed to install windows and get most of that working. However, the system seems to be incredibly unstable. What I mean by this is that trying to do windows updates will blue screen the system, updating graphic drivers, the system hardlocks, booting up allbenchmark crashes it after a 2 min black screen.
Now I spent all of yesterday on this trying to figure it out, I have reformatted three times now (all of different drives) with no avail. I also ran memtest86 over night and its currently still going after 9 hours and 15 minutes with 6 passes and no errors.
Prime95 will surprisingly also run fine (Although I only ran it for an hour). I'm completely lost on what to check next, I doubt its the 780's because it doesn't have anything to with windows updates and that bricks it.
It's also worth mentioning that I had troubles with the board as it wouldn't post unless the sata mode was AHCI instead of RAID and would just turn on the "Boot device LED" (Before windows was installed) unless I actually used the physical memtest button to boot it up. I cleared the CMOS to try to fix that with no avail, so i'm currently not running Raid.
Hopefully I can get an answer or some suggestions, cause i'm all out of them.
Thanks.
Facebook
Twitter
Instagram