G
Guest
Guest
So this is the build im looking to make http://ca.pcpartpicker.com/p/1b1L2, I would use it purely for gaming, i need advice if this is a great build or not (first time building).
After this article was first published, there was an immediate backlash from some of the manufacturers listed in this review. The primary argument was the lack of cure time. Here is the Arctic Silver 5 recommended cure time instruction from the manufacturers web site:
Due to the unique shape and sizes of the particles in Arctic Silver 5's conductive matrix, it will take a up to 200 hours and several thermal cycles to achieve maximum particle to particle thermal conduction and for the heatsink to CPU interface to reach maximum conductivity. (This period will be longer in a system without a fan on the heatsink or with a low speed fan on the heatsink.) On systems measuring actual internal core temperatures via the CPU's internal diode, the measured temperature will often drop 2C to 5C over this "break-in" period. This break-in will occur during the normal use of the computer as long as the computer is turned off from time to time and the interface is allowed to cool to room temperature. Once the break-in is complete, the computer can be left on if desired.
So by my estimation of this statement it would take almost a year of normal use to properly cure the AC5 compound, or almost nine days of continuous power cycles to meet their recommendation. Benchmark Reviews feels that this is a characteristically unreasonable requirement for any TIM product, and we do not support it. We want products that perform without the burden of sacrifice on our time, especially with some many competing products offering performance without this extra requirement.
Tuniq TX-3 (0) Aluminum Oxide Moderate 37.65°C A+
Gelid GC-Extreme (0) Aluminum Oxide Low / Thin 37.65°C A+
Thermaltake Grease A2150 (4) Polysynthetic Silver Low / Thin 37.65°C A+
Arctic Silver 5 Polysynthetic Thermal Compound (4) Polysynthetic Silver Low / Thin 37.55°C A+
Shin-Etsu MicroSi G751 (0) Aluminum Oxide Moderate 37.55°C A+
(Test results by Benchmark Reviews .com)
Each product tested received the curing time recommended (see below), or approximately one hour of thermal cycling prior to testing when no cure time was specified.
(0) No Curing Time or Special Application Suggested
(4) Arctic Silver 5 Application Instructions (up to 200-hours recommended curing time)
After this article was first published, there was an immediate backlash from some of the manufacturers listed in this review. The primary argument was the lack of cure time. Here is the Arctic Silver 5 recommended cure time instruction from the manufacturers web site:
Due to the unique shape and sizes of the particles in Arctic Silver 5's conductive matrix, it will take a up to 200 hours and several thermal cycles to achieve maximum particle to particle thermal conduction and for the heatsink to CPU interface to reach maximum conductivity. (This period will be longer in a system without a fan on the heatsink or with a low speed fan on the heatsink.) On systems measuring actual internal core temperatures via the CPU's internal diode, the measured temperature will often drop 2C to 5C over this "break-in" period. This break-in will occur during the normal use of the computer as long as the computer is turned off from time to time and the interface is allowed to cool to room temperature. Once the break-in is complete, the computer can be left on if desired.
So by my estimation of this statement it would take almost a year of normal use to properly cure the AC5 compound, or almost nine days of continuous power cycles to meet their recommendation. Benchmark Reviews feels that this is a characteristically unreasonable requirement for any TIM product, and we do not support it. We want products that perform without the burden of sacrifice on our time, especially with some many competing products offering performance without this extra requirement.
Tuniq TX-3 (0) Aluminum Oxide Moderate 37.65°C A+
Gelid GC-Extreme (0) Aluminum Oxide Low / Thin 37.65°C A+
Thermaltake Grease A2150 (4) Polysynthetic Silver Low / Thin 37.65°C A+
Arctic Silver 5 Polysynthetic Thermal Compound (4) Polysynthetic Silver Low / Thin 37.55°C A+
Shin-Etsu MicroSi G751 (0) Aluminum Oxide Moderate 37.55°C A+
(Test results by Benchmark Reviews .com)
Each product tested received the curing time recommended (see below), or approximately one hour of thermal cycling prior to testing when no cure time was specified.
(0) No Curing Time or Special Application Suggested
(4) Arctic Silver 5 Application Instructions (up to 200-hours recommended curing time)