Hello my motherboard is the Asrock G41MH/usb3.0 R2.0
my memory rams are
RAM : 8192 MB DDR3 Dual Channel
RAM Speed : 532 MHz (1:2) @ 7-8-8-20
Slot 1 : 4096MB (10700)
Slot 1 Manufacturer : GEIL
Slot 2 : 4096MB (10700)
Slot 2 Manufacturer : GEIL
i have download CPU-Z and its showing that my DRAM freq is at 532 mhz
is something wrong ?
take a look on my whole setup via CPU-Z
http://valid.canardpc.com/2850054
an answer was
532 is 1064 effective, which is prob your mobo's default boot freq, set the sticks manually to 1333, the base timings and voltage, also raise the FSB to 1333 for the DRAM to run, this will OC your CPU to 3.0 so if to high, can lower the CPU multiplier
Any1 that could guide me a bit on how to do it . Do i need a program or something else. ?
my memory rams are
RAM : 8192 MB DDR3 Dual Channel
RAM Speed : 532 MHz (1:2) @ 7-8-8-20
Slot 1 : 4096MB (10700)
Slot 1 Manufacturer : GEIL
Slot 2 : 4096MB (10700)
Slot 2 Manufacturer : GEIL
i have download CPU-Z and its showing that my DRAM freq is at 532 mhz
is something wrong ?
take a look on my whole setup via CPU-Z
http://valid.canardpc.com/2850054
an answer was
532 is 1064 effective, which is prob your mobo's default boot freq, set the sticks manually to 1333, the base timings and voltage, also raise the FSB to 1333 for the DRAM to run, this will OC your CPU to 3.0 so if to high, can lower the CPU multiplier
Any1 that could guide me a bit on how to do it . Do i need a program or something else. ?