Psu compatabilty with cpu
- Thread starter furhaanar
- Start date
Solution
- Jun 19, 2011
- 33,490
- 1,620
- 159,590
http://techreport.com/review/24897/the-big-haswell-psu-compatibility-list#ocz just wanted confirmation
For a few weeks now, we've known that Intel's Haswell processors feature a new sleep state that isn't compatible with all power supplies. Haswell's sleep power draw is substantially lower than that of previous generations, and it can trigger some PSUs' under-voltage protection and force a system reset.
Corsair described the problem more elaborately in an e-mail to us, which reads:
According to Intel's presentation at IDF, the new Haswell processors enter a sleep state called C7 that can drop processor power usage as low as 0.05A. Even if the sleeping CPU is the only load on the +12V rail, most power supplies can handle a load this low. The potential problem comes up when there is still a substantial load on the power supply's non-primary rails (the +3.3V and +5V). If the load on these non-primary rails are above a certain threshold (which varies by PSU), the +12V can go out of spec (voltages greater than +12.6V). If the +12V is out of spec when the motherboard comes out of the sleep state, the PSU's protection may prevent the PSU from running and will cause the power supply to "latch off". This will require the user to cycle the power on their power supply using the power switch on the back of the unit.
Since the news broke, a number of PSU vendors have indicated which of their power supplies fully support Intel's new processors. We covered some of those announcements, but keeping track of all of them has been difficult. In an effort to be thorough—and, you know, to make things easy for everybody—we've spent a few hours compiling compatibility information from all the major PSU vendors.
Corsair described the problem more elaborately in an e-mail to us, which reads:
According to Intel's presentation at IDF, the new Haswell processors enter a sleep state called C7 that can drop processor power usage as low as 0.05A. Even if the sleeping CPU is the only load on the +12V rail, most power supplies can handle a load this low. The potential problem comes up when there is still a substantial load on the power supply's non-primary rails (the +3.3V and +5V). If the load on these non-primary rails are above a certain threshold (which varies by PSU), the +12V can go out of spec (voltages greater than +12.6V). If the +12V is out of spec when the motherboard comes out of the sleep state, the PSU's protection may prevent the PSU from running and will cause the power supply to "latch off". This will require the user to cycle the power on their power supply using the power switch on the back of the unit.
Since the news broke, a number of PSU vendors have indicated which of their power supplies fully support Intel's new processors. We covered some of those announcements, but keeping track of all of them has been difficult. In an effort to be thorough—and, you know, to make things easy for everybody—we've spent a few hours compiling compatibility information from all the major PSU vendors.
- Jun 19, 2011
- 33,490
- 1,620
- 159,590
Haswell compatibility is not about how many amps the PSU has on the 12v rail. Haswell cpu's feature a new sleep state(c7) which requires a compatible power supply. Here is a link with more information.
http://techreport.com/review/24897/the-big-haswell-psu-compatibility-list
Facebook
Twitter
Instagram