- Jul 3, 2013
- 1
- 0
- 10,510
So I have almost finished my first complete build but I have quite a few connectors from the case I don't know where to plug in and a couple others I need to confirm before plugging in also. Let me start with the specs:
* Rosewill THOR V2 Gaming ATX Full Tower Computer Case
* EVGA x79 Classified motherboard (151-SE-E779-K2)
* I7-3820 lga2011 processor * NH-D14 Noctua CPU cooler
* 16GB of Corsair Vengeance 1600mhz ram
* Antec 850W gold power supply
1. At the top of the motherboard it shows two spots for 8pin connectors. One labeled PW12-1 and one PW12-2. My PSU has a connector with 2x4pin labeled CPU and CPU. The PSU also has another attachable connector labeled CPU which is an 8pin. Where do I plug these in and do I need all of these plugged in?
2. The case has 4 direct 3pin leads coming off of fans and it also has 5 3pin leads coming out of the case harness labelled FAN A1, FAN A2, FAN A3, FAN B1, FAN B2 (these are male for the fan speed knobs I would assume). My motherboard has 4pin slots on it labelled JSYS_FAN1, JSYS1_FAN1, JSYS2_FAN1, JPWR_FAN1, JAUX_FAN1, JCPU_FAN1, CHA_FAN1 (Might be JCHA_FAN1). How do I plug in all of these fans and connectors?
3. The CPU cooler has 2 4 pin connectors coming off of it and it also comes with a splitter to connect both of the 4pins into one 4pin connetor. Do I plug this into JCPU_FAN1?
4. There are a couple other connectors coming out of the computer cases harness I am unsure where to plugin. They are labelled, HDAUDIO(9pin) + AC'97(9pin), POWERSW(2pin), HDDLED(2pin), RESETSW(2pin), -P LED(1pin), +P LED(1pin). Where do I plug these in?
Thanks for the help in advance. If you need any pictures or any other information just let me know.
* Rosewill THOR V2 Gaming ATX Full Tower Computer Case
* EVGA x79 Classified motherboard (151-SE-E779-K2)
* I7-3820 lga2011 processor * NH-D14 Noctua CPU cooler
* 16GB of Corsair Vengeance 1600mhz ram
* Antec 850W gold power supply
1. At the top of the motherboard it shows two spots for 8pin connectors. One labeled PW12-1 and one PW12-2. My PSU has a connector with 2x4pin labeled CPU and CPU. The PSU also has another attachable connector labeled CPU which is an 8pin. Where do I plug these in and do I need all of these plugged in?
2. The case has 4 direct 3pin leads coming off of fans and it also has 5 3pin leads coming out of the case harness labelled FAN A1, FAN A2, FAN A3, FAN B1, FAN B2 (these are male for the fan speed knobs I would assume). My motherboard has 4pin slots on it labelled JSYS_FAN1, JSYS1_FAN1, JSYS2_FAN1, JPWR_FAN1, JAUX_FAN1, JCPU_FAN1, CHA_FAN1 (Might be JCHA_FAN1). How do I plug in all of these fans and connectors?
3. The CPU cooler has 2 4 pin connectors coming off of it and it also comes with a splitter to connect both of the 4pins into one 4pin connetor. Do I plug this into JCPU_FAN1?
4. There are a couple other connectors coming out of the computer cases harness I am unsure where to plugin. They are labelled, HDAUDIO(9pin) + AC'97(9pin), POWERSW(2pin), HDDLED(2pin), RESETSW(2pin), -P LED(1pin), +P LED(1pin). Where do I plug these in?
Thanks for the help in advance. If you need any pictures or any other information just let me know.
Facebook
Twitter
Instagram