Sign in with
Sign up | Sign in
Your question
Solved

H110 in NZXT Switch 810 case

Last response: in Systems
Share
July 3, 2013 6:10:16 PM

I know it's possible putting the H110 in some of the corsair cases like the C70,which I was originally going to go for with the this cooler but after looking at the 810 really like the aesthetics and how I can add more things to it in the future and overall the amount of cooling options it offers,but I wanted to know if you can have the H110 in the Switch 810 as it supports up to 3 140mm fans on top and is it possible to do a push/pull configuration where the first 2 sets of 140mm fans will be on the outside,just under the cover of the removable top grill,then have the radiator inside the case along with the other 2 fans?The spacing holes for the radiator is 20cm I just don't know the spacing holes for the case. If anyone can help that would be great!

Best solution

July 3, 2013 6:54:13 PM

It will work fine; the top can support up to 360mm rad, and the H100 has a 240. I recommend getting aftermarket, quieter fans, as the Corsair stock ones are quite loud. :)  As to you second question, that depends on your motherboard.
However, you don't want push/pull. It is loud, and the difference is only 1-2 degrees.
Share
July 3, 2013 7:17:52 PM

dannyboy2233 said:
It will work fine; the top can support up to 360mm rad, and the H100 has a 240. I recommend getting aftermarket, quieter fans, as the Corsair stock ones are quite loud. :)  As to you second question, that depends on your motherboard.
However, you don't want push/pull. It is loud, and the difference is only 1-2 degrees.

I'm planning on getting the H110 NOT the H100. Which means it's a 280mm rad.As you said it supports up to a 360 rad which I'm guessing the 280 would fit no problem BUT the spacing where you have to screw the fans with the rad is 20mm and the problem with the H110 is that there's not a lot of cases that support that hence the reason I'm asking if the H110 will be able to to be mounted on the Switch 810.
m
0
l
July 3, 2013 8:41:15 PM

Sackboy said:
dannyboy2233 said:
It will work fine; the top can support up to 360mm rad, and the H100 has a 240. I recommend getting aftermarket, quieter fans, as the Corsair stock ones are quite loud. :)  As to you second question, that depends on your motherboard.
However, you don't want push/pull. It is loud, and the difference is only 1-2 degrees.

I'm planning on getting the H110 NOT the H100. Which means it's a 280mm rad.As you said it supports up to a 360 rad which I'm guessing the 280 would fit no problem BUT the spacing where you have to screw the fans with the rad is 20mm and the problem with the H110 is that there's not a lot of cases that support that hence the reason I'm asking if the H110 will be able to to be mounted on the Switch 810.


Sorry, just a typo. :) 
m
0
l
!