tronador :
fyrye :
tronador :
Hi, I have a 300mbps rputer and a 150 mbps repeater. While connected to the repeater my speed will be of 150mbps or 75mbps?
Depending on the repeater, it would be 50% of the device doing the repeating.
Some repeaters do not switch between AP and Client modes thusly not affecting the bandwidth.
http://www.ezlan.net/Wireless_Modes.html
Sorry, could you give me an example of such repeaters
See specifications of products
Single Radio 802.11n @ 150Mbps (50% of 300Mbps):
http://hawkingtech.com/products/hi-gain_wireless_networking/range_extenders_&_repeaters/HWREN15.html
http://www.asus.com/Networking/RTN53/#overview
(See note about connecting while running as repeater)
Dual Radio 802.11n @ 300Mbps (100% of 300Mbps):
http://hawkingtech.com/products/hi-gain_wireless_networking/range_extenders_&_repeaters/HAW2R1.html
The dual radio model wouldn't need to alternate between Client and AP as the one radio is dedicated to receiving, while the other radio is dedicated to broadcasting.
You do lose some speed but not near the 50% bandwidth most complain about.
Outside of some enterprise-grade routers, your average wireless router has only one radio. It cannot receive and broadcast simultaneously. Therefore, it must receive the signal first, and then switch to broadcasting, and then switch back to receiving, and then switch back to broadcasting, and so on. Consequently, the one radio can devote only half its time to either role.
http://www.wi-fiplanet.com/tutorials/article.php/3893311/Ask-the-Wi-Fi-Guru-About-Wi-Fi-Repeaters-and-Windows-XP.htm
As a side note, radio and antenna are not the same things.
Lots of routers/repeaters will have 2 or 3 antennas, this does not mean they have 2 or 3 radios.
2 antennas may be connected to one radio while the third hooked up to a second, etc.
Always read the specifications of the product before you buy.