How to tell what mouse i have
- Thread starter DJDamo
- Start date
Solution
aredflyingbird
Honorable
- Dec 3, 2012
- 537
- 0
- 11,160
Next to the model number, it should say "Infrared Gaming Mouse". This shows on every death adder mouse. If it lights up blue, then it's the standard edition. If not, then its the black edition. 2013 edition is the one that lights up Green. These are the drivers, http://drivers.razersupport.com//index.php?_m=downloads&_a=view&parentcategoryid=326&pcid=11&nav=0,11
manofchalk
Glorious
- May 11, 2012
- 12,914
- 3
- 48,960
The 3.5g (blue light) and Black edition are the same mouse, except the Black edition is just aesthetically different.
If it lights up Green, you have the 2013 edition (should also say on the bottom). Differences to the previous ones is a rougher finish on the mouse, rubber side grips, a different LED colour and a pointlessly higher DPI sensor.
The Razer Synpase driver linked by Ared work on pretty much every Razer product, download that, it will figure out whats connected and work automatically (hopefully... The Synapse drivers dont have the best reputation).
If it lights up Green, you have the 2013 edition (should also say on the bottom). Differences to the previous ones is a rougher finish on the mouse, rubber side grips, a different LED colour and a pointlessly higher DPI sensor.
The Razer Synpase driver linked by Ared work on pretty much every Razer product, download that, it will figure out whats connected and work automatically (hopefully... The Synapse drivers dont have the best reputation).
Tabris DarkPeace
Honorable
- Jul 3, 2013
- 683
- 0
- 11,360
Do these drivers change USB polling from 125 to 1000 times per second in Windows?
- They could be the cause of many a problem...
- They could be the cause of many a problem...
manofchalk
Glorious
- May 11, 2012
- 12,914
- 3
- 48,960
Which mouse have you figured it to be?
Does it light up when plugged in?
I'v had a Deathadder 2013 die on me before, eventually needing to just be outright replaced. Started by just randomly disconnecting, then when I did plug it back in it wouldn't reconnect, light stopped turning on and eventually just died.
Does it light up when plugged in?
I'v had a Deathadder 2013 die on me before, eventually needing to just be outright replaced. Started by just randomly disconnecting, then when I did plug it back in it wouldn't reconnect, light stopped turning on and eventually just died.
ssddx
Titan
- May 27, 2009
- 17,054
- 5
- 74,965
personally i think the synapse 2.0 program/drivers are utter garbage.
the old deathadder 3.5g has actual "drivers" you can download which do not include synapse and work perfectly fine. synapse tends to be rather buggy.
try uninstalling all of the mouse drivers and restarting. does your mouse at least work? if it does then try putting on the normal drivers (not synapse) does it work now?
the old deathadder 3.5g has actual "drivers" you can download which do not include synapse and work perfectly fine. synapse tends to be rather buggy.
try uninstalling all of the mouse drivers and restarting. does your mouse at least work? if it does then try putting on the normal drivers (not synapse) does it work now?
TRENDING THREADS
-
Question User RX 580 8gb red devil powercolor, asking original BIOS- Started by PizzaInGame
- Replies: 5
-
-
-
Facebook
Twitter
Instagram