I need a mid tower case that can hold a 3x120 mm radiator , but that it dosent exeed 110 bucks . If the case would be very ventilated too that would be great
Corsair Vengeance C70
As you see its a very tight fit so i would suggest you getting a 30mm Rad.
I don't know if you want a whole 360 rad cause a broken up something likee one 120 in the back and 2 on top would work just the same as a whole 360 rad.
Corsair Vengeance C70
As you see its a very tight fit so i would suggest you getting a 30mm Rad.
I don't know if you want a whole 360 rad cause a broken up something likee one 120 in the back and 2 on top would work just the same as a whole 360 rad.
Sorry im a begginer in watercooling but if i place a radiator on the side and on the top how would I loop them. If i do this will a carbide 200r case work ?
You just have to connect them with tubbings by using fittings as you see in the picture below.
****************************************************************************
I HIGHLY suggest you to go check out the Tom's Hardware Watercooling Guide, it might help you alot. Go Here:***READ FIRST*** Tom's HW Watercooling Sticky v2.0
http://www.tomshardware.com/forum/277130-29-read-first-watercooling-sticky