Solved

Need help overclock E5300 CPU

Hello all !
I want to ask for guys who can help me :) So I overclock my CPU From 2.6GHZ->3.0GHZ (230 FSB) do I need set voltage to higher?

My Spec
CPU Intel Pentium E5300 2.6GHZ 2mb chase
Mobo Asus P5G41T-M LX
Ram Kinstone 4GB
PSU is 450wat (I think its to low right?)
Video Radeon HD4850 512 256bit
20 answers Last reply Best Answer
More about overclock e5300 cpu
  1. its porbably like this, you set the FSB to 230Mhz at first then start increasing the voltage in small increments [about 0.01 volts] till you gain full stability.
  2. Best answer
    Egils Gerasimovs said:
    Hello all !
    I want to ask for guys who can help me :) So I overclock my CPU From 2.6GHZ->3.0GHZ (230 FSB) do I need set voltage to higher?

    My Spec
    CPU Intel Pentium E5300 2.6GHZ 2mb chase
    Mobo Asus P5G41T-M LX
    Ram Kinstone 4GB
    PSU is 450wat (I think its to low right?)
    Video Radeon HD4850 512 256bit


    so your just using the fsb to overclock? is your multiplier locked? just using the fsb with out rasing the voltage will cause it to crash, you may not be able to even raise your fsb that high and have it stable just like on the old amd i have that the multiplier was locked and voltage was maxed out on.
  3. and wher can I find that voltage ? and you mean this Vcore <- ther I must set up volage? and what woltage will be bether for 3.0ghz?
  4. 06yfz450ridr said:
    Egils Gerasimovs said:
    Hello all !
    I want to ask for guys who can help me :) So I overclock my CPU From 2.6GHZ->3.0GHZ (230 FSB) do I need set voltage to higher?

    My Spec
    CPU Intel Pentium E5300 2.6GHZ 2mb chase
    Mobo Asus P5G41T-M LX
    Ram Kinstone 4GB
    PSU is 450wat (I think its to low right?)
    Video Radeon HD4850 512 256bit


    so your just using the fsb to overclock? is your multiplier locked? just using the fsb with out rasing the voltage will cause it to crash, you may not be able to even raise your fsb that high and have it stable just like on the old amd i have that the multiplier was locked and voltage was maxed out on.


    yes I just increat only fsb from 200-> 230 buth I dont tuch the voltage reason I am beginer in that and whats is Multiplier ?
  5. Hear guys you hawe screen whats hapen when I load my mystem to max ! http://img822.imageshack.us/img822/1730/1lor.png
  6. looks acceptable to me.
    You have a smidgen of headroom for OCing there (temp-and-voltage wise )
  7. how can I do it? and wher I dont know wich voltage I must make larger !
  8. Egils Gerasimovs said:
    how can I do it? and wher I dont know wich voltage I must make larger !



    were those temps under full load or idle?

    check in the bios to increase the voltage, bump it up .05 at a time and raise the multiplier if possible, the multiplier should be near the fsb adjustment
  9. Thats mean temerature and I marck it red color !

    multiplies under fsb ok I will check buth obauth voltage I dont know (Vcore)?
  10. cpu voltage?
  11. cpu voltage?
  12. ok I will check it ! so I hawe to increat voltage by 0.5 each time and stres my cpu after it?
  13. ther is no cpu voltage only hawe cpu vcore
  14. I faund multipliers and in my cpuid its lock like this http://imageshack.us/f/515/l2ys.png/ my cpu hawe sped step tehnology thats auto control clock
  15. Egils Gerasimovs said:
    I faund multipliers and in my cpuid its lock like this http://imageshack.us/f/515/l2ys.png/ my cpu hawe sped step tehnology thats auto control clock

    I'd disable speedstep,also c1e (under cpu tab) then you change power to high performance in Windows.
    3 voltages to raise:
    NB
    Vcore
    FSB term /VTT /Whatever they call it.
    also..lower your RAM speed as you increase FSB so it doesn't limit you.
    You should be able to raise fsb to about 350 on that board I think.
    It will probably hard-wall there.
  16. :O fsb rise to 350 that wont damage my cpu or MB ? I hawe stock coler :(
  17. hi guys so I decide to upgrade my cpu to 2 Quad Processor Q6600 (8M Cache, 2.40 GHz, 1066 MHz FSB) what you say guys?
  18. Egils Gerasimovs said:
    hi guys so I decide to upgrade my cpu to 2 Quad Processor Q6600 (8M Cache, 2.40 GHz, 1066 MHz FSB) what you say guys?


    will your mobo support it? you have to check to see if you can even throw one in there that or buy a new mobo that you know you can overclock and has better featuresv
  19. yes mobo suport that cpu I only need update my bios version :) thats all! so its god cpu?
  20. still a pretty good cpu today if you get it for cheap
Ask a new question

Read More

Overclocking Pentium CPUs