/ Sign-up
Your question

Micro ATX build, cooler question

  • ATX
  • Cooling
  • Cases
  • Components
  • Build
Last response: in Components
July 15, 2013 10:05:17 PM

Hi there.

I'm looking to transfer my current setup into a LIAN LI PC-V354B Black Aluminum MicroATX Mini Tower Computer Case. At the same time, I want to improve my cpu cooler with a Corsair Hydro H60.

I have two questions about the size/compatibility of this cooler though, and I can't find these specific answers anywhere else:

1) Is the exhaust port in the back of the case compatible with the 120mm fan of the cooler?

if so...

2) Will the radiator actually fit on said fan? I ask because the space between the fan port and the top of the case/the psu seems quite limited.

Thanks for any help!

More about : micro atx build cooler question

Best solution

July 15, 2013 10:16:51 PM

On that port with the H60 you would remove the fan in there and replace it with the radiator plus the fan included. The radiator and fan is a total of 62mm thick, so about the size of 2 120 mm fan in there. If one barely clears it, it wont fit. You can always measure if needed. IF you need to you could probably fit it on the fan port on the top, maybe.
July 16, 2013 1:05:21 AM

So you mean replace one of the front fans? Hm... didn't look like there was enough room between the front and the HD cages, but I know people have fit these kind of coolers into this case before.
July 16, 2013 10:49:51 AM

From what I saw there are 4 fan ports on the case.
Related resources