ASROCK Z87 EXTREME6 + COOL MASTER GX 650 Watt 12V Plug

loewj

Honorable
Jul 18, 2013
7
0
10,510
As a first time PC builder, I seem to have run into an issue with the power supply + motherboard. There just does not seem to be any pins on the power supply that connect to the 12 volt power connector on the motherboard. Any ideas? Thank you!
 
Solution
Connect the first connector cpu(4+4) shown in the connector illustration at the link below to the 8 pin socket just in the middle of the 2 mosfet (heatsinks ). (1 above the cpu and one at the left side of the cpu)

http://www.coolermaster.com/product/Detail/powersupply/gx-series/gx-650w.html



And for connecting the 24 pin connector to your mobo take the largest conector from your power supply and connect it to the 24pin socket just at right of the ram slots



Hope this helped




Dont forget to close the post by selecting the best solution



Connect the first connector cpu(4+4) shown in the connector illustration at the link below to the 8 pin socket just in the middle of the 2 mosfet (heatsinks ). (1 above the cpu and one at the left side of the cpu)

http://www.coolermaster.com/product/Detail/powersupply/gx-series/gx-650w.html



And for connecting the 24 pin connector to your mobo take the largest conector from your power supply and connect it to the 24pin socket just at right of the ram slots



Hope this helped




Dont forget to close the post by selecting the best solution



 
Solution


yeah i know. i read your first post after i made mine and corrected it, didn't see the 2 4 pins on the newegg product page, saw them on the coolermaster website though and realized my mistake.
 

loewj

Honorable
Jul 18, 2013
7
0
10,510


Okay, so I'm supposed to use the 2x4 connector? It just does not seem to fit!
 

loewj

Honorable
Jul 18, 2013
7
0
10,510