USB 3.0 Hub not recognizing of my mouses

Toggle sidebar Toggle sidebar
L

LtJohnny117

Honorable
Jul 20, 2013
4
0
10,510
okay so here is the deal. I have my computer in another room and running cables through the wall where my desk is. Also I am running a usb 3.0 hub (Anker 7 Port USB 3.0 hub) to where my desk is. Everything working fine. (1 week ago) I upgraded my computers mother board and CPU (Gigabyte GA-F2A85X-UP4 and a AMD FM2 A10-6800K). When I finished that reinstalled windows downloaded all the drivers. Now a week later my hub stopped recognizing my Razee Deathadder 3500dpi edition or any of my other mouses. Any help would be good.

More Info:
Motherboard: Gigabyte GA-F2A85X-UP4
CPU: AMD FM2 A10-6800K
Video Card: XFX Radeon HD 7800 2GB DDR5
Razer Blackwidow Ultimate Stealth Edition*
Razer Deathadder 3500dpi edition*
Anker 7 port usb 3.0 hub
Blue Snowball Mic*
Hauppauge HD PVR 2*

*Plugged into USB 3.0 Hub
 
Solution
ingtar33
Sort by date Sort by votes
ingtar33

ingtar33

Glorious
Dec 17, 2012
9,017
198
45,840
make sure you have the proper gigabyte usb3.0 drivers installed. i know there are a lot of weird usb 3.0 driver issues in windows 7 and 8, sounds like a driver issue.

is the computer recognising ANYTHING connected to the hub? is it even recognising the hub?
 
Upvote 0 Downvote
L

LtJohnny117

Honorable
Jul 20, 2013
4
0
10,510

I have installed Etron USB 3.0 drivers and amd 3.0 drivers. All the devices seem to be recognized by the hub but the mouses.
 
Upvote 0 Downvote
ingtar33

ingtar33

Glorious
Dec 17, 2012
9,017
198
45,840


if you plug the mouse directly into the computer do you have the same problem?
 
Upvote 0 Downvote
L

LtJohnny117

Honorable
Jul 20, 2013
4
0
10,510


No if I plug it into a USB 2.0 port anywhere on the PC it works fine. The mouse stopped working when I plugged in my iPhone to the hub to charge the the entire hub like shut down and then all the devices started coming back on one at a time except for the mouse
 
Upvote 0 Downvote
ingtar33

ingtar33

Glorious
Dec 17, 2012
9,017
198
45,840


is the iphone still plugged into the hub? cause there is a certain amount of power a hub can push through.
 
Upvote 0 Downvote
Solution
L

LtJohnny117

Honorable
Jul 20, 2013
4
0
10,510


Wow thanks dude. So since you told me that I started up the computer and plugged in every device into the hub on at a time an determined that after the third USB nothing will work. So I am going to return the 7 port hub and get two- four part hubs so it will split the power. Thanks again.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom